Kenwood KDC-X615, KDC-6015, KDC-515S instruction manual Station Name Preset Snps, Assigning Names

Page 16

Tuner features

English

Station Name Preset (SNPS)

You can assign names to radio stations with the Station Preset Memory. Up to 32 FM stations and 16 AM stations can be assigned names.

1Adjust the frequency to the station whose name you want to enter.

NOTE

The station name preset function cannot be used when a program service name or radio text is displayed.

2Press the NAME.S button for at least two seconds.

"NAME SET" is displayed once the station name preset mode is entered.

The cursor will blink in the position where letters are entered.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

You can also move the cursor left or right by pressing the 4 or ¢ buttons, respectively, on the remote.

4Each time the 38 button is pressed, the characters to be entered change as listed below.

Press the FM or AM button to display the desired character. Characters that can be displayed are as follows.

Alphabet (upper case): A ~ Z

Alphabet (lower case): a ~ z (KDC-X615/6015 Only)

Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]

Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß ‹ fl

âä ê ë î ï ô ö û ü ñ ç © Æ › fi (KDC-X615/6015 Only)

NOTE Direct Alphabet Input

Direct input can be made of letters (alphabetical) with the letter entry buttons on the remote.

Example: Use the following table to enter the name "DANCE".

Character

Button to press

# Times pressed

 

 

 

“D”

#3

1

“A”

#2

1

“N”

#6

2

“C”

#2

3

“E”

#3

2

5Continue steps 3 and 4 until all the characters are chosen for the name.

NOTE

You can enter up to 8 characters for each name.

6Assigning Names

Press the NAME.S button on the unit or the OK button on the remote.

The name of the station is stored in memory, and the Station Name Preset mode ends.

Also, if you make no input for 10 seconds, the name will be stored up to the point that you have entered, and the mode ends.

NOTE

•You can assign names to up to 32 FM stations and 16 AM stations.

•All the station names will be erased if you press the RESET button.

•If you want to change the name of a station, first display the name of the station (following steps 1 and 2 above), then change the letter(s) that you want by following steps 3 and 4.

— 16 —

Page 15 Page 17
Image 16
Page 15 Page 17
Contents KDC-X615 KDC-6015 KDC-515S Contents 2Warning To prevent injury or fire, take the following precautions Safety precautionsDo Not Load 3-in. CDs in the CD slot Cleaning the Faceplate Terminals Cleaning the UnitCleaning the CD Slot Lens FoggingHandling Compact discs General features PowerVolume AttenuatorSwitching Modes Audio Control SettingBass F Adjust the center frequency of the bass Bass/BAS Adjust the bass levelStoring your sound settings Loudness Mobile PresetNon-Fading Output Theft Deterrent Faceplate Removing the FaceplateReattaching the Faceplate Hiding the control panelTuner features SRCStation Preset Memory TuningAuto Memory Entry Switching Display for Tuner Station Name Preset Play SnppCanceling mode during input Changing the DisplayStation Name Preset Snps Assigning NamesCD/External disc control features OperationPlaying Other Disc mode Playing CDsFast Forwarding and Reversing Disc Play Switching Display for DiscsTrack Search Canceling Direct Disc Search While It Is Operating Track / Disc RepeatMaking a Reverse Disc Search Making a Forward Disc SearchTrack Scan Random PlayDisc Name Preset Play Dnpp Text ScrollTo scroll automatically To scroll manuallyTo cancel Dnpp mode Press the Dnpp button Presetting Disc Names Dnps Menu settings Menu System Manual Time AdjustmentTouch Sensor Tone Calendar Mode Calendar AdjustmentAdjusting the date Memo Mode Entering the month or day setting modeSecurity Code Inputting / Changing the textIf you press the Reset button or remove the battery Selectable IlluminationContrast Adjustment Switching preoutSwitching Graphic Display DimmerClean Reception System Circuit Crsc External Amp ControlBasic operations Basic Operations of remoteLoading and Replacing the Batteries Tuner features CD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation Installing in Japanese-Made CarsRemoving the hard rubber frame Removing the UnitInstallation Troubleshooting Guide Problem Possible Cause SolutionCD/MD/External disc control mode Blank FM tuner section Audio sectionAM tuner section CD player sectionPage Page Page Page Page

KDC-515S, KDC-X615, KDC-6015 specifications

The Kenwood KDC series of car audio receivers, including the KDC-X615, KDC-6015, and KDC-515S, sets a high standard for sound quality and user-friendly features. These models are designed to enhance your in-car audio experience, providing excellent sound performance and connectivity options for modern audio needs.

Starting with the KDC-X615, this model stands out with its vibrant display and intuitive controls. It supports high-resolution audio formats, ensuring that your music sounds as close to the original recording as possible. The KDC-X615 features Bluetooth connectivity for hands-free calling and audio streaming, allowing you to enjoy your favorite playlists without distractions. Additionally, it offers a 13-band equalizer and a digital sound processor, which enable precise adjustments to tailor the audio output according to personal preferences or specific genres. With its dual phone connection, switching between devices is seamless, making it perfect for multi-taskers.

Next in line is the KDC-6015, which offers many similar features but with a more streamlined design. It incorporates a clear and easy-to-read LCD display that enhances visibility, even in bright sunlight. The KDC-6015 boasts USB and AUX inputs for easy connection to portable devices, expanding your playback options. Like the KDC-X615, it also includes Bluetooth connectivity for hands-free functionality. This model is slightly more budget-friendly while still delivering impressive sound through its variable color illumination feature, which allows users to customize the look to match their car's interior.

Finally, the KDC-515S is an entry-level option that still doesn’t compromise on quality. This model provides a built-in CD player alongside AM/FM radio, allowing users to enjoy traditional media alongside digital formats. The KDC-515S features an adjustable 3-band EQ, enabling users to make basic audio adjustments according to preference. While it lacks some of the advanced Bluetooth functions found in its higher-end counterparts, it still offers an AUX input for external devices, making it ideal for those who are looking for a reliable and straightforward audio solution.

In summary, the Kenwood KDC series provides a wide range of features across its models, catering to various user needs. From the advanced wireless capabilities of the KDC-X615 to the essential functionality of the KDC-515S, each model embodies Kenwood’s commitment to delivering quality sound and versatility in car audio systems.
Top Page Image Contents