Kenwood KDC-6015, KDC-X615, KDC-515S instruction manual Presetting Disc Names Dnps

Page 24

CD/External disc control features

English

Presetting Disc Names (DNPS)

Store the names of discs to be displayed when played.

1Play the disc whose name you want to preset.

NOTE

•This function is not available for disc changers that do not feature the Disc Name Preset function.

•This procedure is not to be used to store the disc and track titles for MDs that you record.

•The disc name preset function cannot be used when a disc title name or track title is displayed.

2Press the NAME.S button for at least two seconds. "NAME SET" is displayed and the disc name preset mode is entered.

The cursor blinks in the position where character input can be made.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

You can also move the cursor left or right by pressing the TRACK+ or TRACK– buttons, respectively, on the remote control.

4Each time the 38 button is pressed, the characters to be

entered change as listed below.

Press the DISC+ or DISC– button to display the desired character.

Characters that can be displayed are as follows.

Alphabet (upper case): A ~ Z

Alphabet (lower case): a ~ z (KDC-X615/6015 Only)

Numerals and symbols: 0~9 @ ” ‘ ` % & ∗ + - = , . / \ < > [ ]

Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß ‹ fl â ä ê ë î ï ô ö û ü ñ ç © Æ › fi

(KDC-X615/6015 Only)

NOTE

The operation and characters that can be entered may change as listed below, depending on the unit that is connected.

A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below.

Press the DISC+ or DISC– button to display the desired character. Besides the alphabet (capital letters only) and numbers, you can choose the following characters: /, +, –, ∗ , =, <, >, [ and ].

NOTE Direct Alphabet Input

(Function of remote with number/letter entry buttons)

If the disc changers that were manufactured and sold after 1997 (except for KDC-C560) are connected, you can directly input letters using the number/letter entry buttons on the remote. Example: Use the following table to enter the name "DANCE".

Character

Button to press

# Times pressed

 

 

 

“D”

#3

1

“A”

#2

1

“N”

#6

2

“C”

#2

3

 

 

 

“E”

#3

2

5Continue steps 3 and 4 until all the characters are chosen for the name.

6Press either the NAME.S button on the main unit or the OK button on the remote.

The disc name is stored and the disc name preset mode is canceled.

If you make no entry in a 10-second period, the name will be stored with the characters input so far.

NOTE

•The number of characters and discs whose names can be stored will differ depending on the disc changer that is

— 24 —

Page 23 Page 25
Image 24
Page 23 Page 25
Contents KDC-X615 KDC-6015 KDC-515S Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsDo Not Load 3-in. CDs in the CD slot Cleaning the Faceplate Terminals Cleaning the UnitCleaning the CD Slot Lens FoggingHandling Compact discs General features PowerVolume AttenuatorSwitching Modes Audio Control SettingBass F Adjust the center frequency of the bass Bass/BAS Adjust the bass levelStoring your sound settings Mobile Preset LoudnessNon-Fading Output Theft Deterrent Faceplate Removing the FaceplateReattaching the Faceplate Hiding the control panelTuner features SRCTuning Station Preset MemoryAuto Memory Entry Switching Display for Tuner Station Name Preset Play SnppCanceling mode during input Changing the DisplayStation Name Preset Snps Assigning NamesCD/External disc control features OperationPlaying Other Disc mode Playing CDsSwitching Display for Discs Fast Forwarding and Reversing Disc PlayTrack Search Canceling Direct Disc Search While It Is Operating Track / Disc RepeatMaking a Reverse Disc Search Making a Forward Disc SearchTrack Scan Random PlayDisc Name Preset Play Dnpp Text ScrollTo scroll automatically To scroll manuallyTo cancel Dnpp mode Press the Dnpp button Presetting Disc Names Dnps Menu settings Manual Time Adjustment Menu SystemTouch Sensor Tone Calendar Adjustment Calendar ModeAdjusting the date Memo Mode Entering the month or day setting modeSecurity Code Inputting / Changing the textIf you press the Reset button or remove the battery Selectable IlluminationContrast Adjustment Switching preoutSwitching Graphic Display DimmerClean Reception System Circuit Crsc External Amp ControlBasic Operations of remote Basic operationsLoading and Replacing the Batteries Tuner features CD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation Installing in Japanese-Made CarsRemoving the hard rubber frame Removing the UnitInstallation Troubleshooting Guide Problem Possible Cause SolutionCD/MD/External disc control mode Blank FM tuner section Audio sectionAM tuner section CD player sectionPage Page Page Page Page

KDC-515S, KDC-X615, KDC-6015 specifications

The Kenwood KDC series of car audio receivers, including the KDC-X615, KDC-6015, and KDC-515S, sets a high standard for sound quality and user-friendly features. These models are designed to enhance your in-car audio experience, providing excellent sound performance and connectivity options for modern audio needs.

Starting with the KDC-X615, this model stands out with its vibrant display and intuitive controls. It supports high-resolution audio formats, ensuring that your music sounds as close to the original recording as possible. The KDC-X615 features Bluetooth connectivity for hands-free calling and audio streaming, allowing you to enjoy your favorite playlists without distractions. Additionally, it offers a 13-band equalizer and a digital sound processor, which enable precise adjustments to tailor the audio output according to personal preferences or specific genres. With its dual phone connection, switching between devices is seamless, making it perfect for multi-taskers.

Next in line is the KDC-6015, which offers many similar features but with a more streamlined design. It incorporates a clear and easy-to-read LCD display that enhances visibility, even in bright sunlight. The KDC-6015 boasts USB and AUX inputs for easy connection to portable devices, expanding your playback options. Like the KDC-X615, it also includes Bluetooth connectivity for hands-free functionality. This model is slightly more budget-friendly while still delivering impressive sound through its variable color illumination feature, which allows users to customize the look to match their car's interior.

Finally, the KDC-515S is an entry-level option that still doesn’t compromise on quality. This model provides a built-in CD player alongside AM/FM radio, allowing users to enjoy traditional media alongside digital formats. The KDC-515S features an adjustable 3-band EQ, enabling users to make basic audio adjustments according to preference. While it lacks some of the advanced Bluetooth functions found in its higher-end counterparts, it still offers an AUX input for external devices, making it ideal for those who are looking for a reliable and straightforward audio solution.

In summary, the Kenwood KDC series provides a wide range of features across its models, catering to various user needs. From the advanced wireless capabilities of the KDC-X615 to the essential functionality of the KDC-515S, each model embodies Kenwood’s commitment to delivering quality sound and versatility in car audio systems.
Top Page Image Contents