Kenwood KDC-515S, KDC-6015, KDC-X615 instruction manual CD/MD/External disc control mode

Page 41

Troubleshooting Guide

CD/MD/External disc control mode

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

The disc control mode cannot

No wire has been connected to the disc changer input

Connect the wire to the disc changer input terminal on

be selected.

terminal on the unit.

the unit.

 

 

 

The specified disc does not

The specified CD is quite dirty.

Clean the CD.

play, but another one plays

 

 

The CD is upside-down.

Load the CD with the labeled side up.

instead.

 

 

 

 

The disc is loaded in a different slot from that specified.

Eject the disc magazine and check the number for the

 

 

specified disc.

 

 

 

 

The disc is severely scratched.

Try another disc instead.

 

 

 

The sound skips.

Something is touching the disc changer.

Remove whatever is touching it.

 

 

 

 

The CD is scratched or dirty.

If skipping happens at the same place when the car is

 

 

stopped, something with the CD is wrong. Clean the CD.

 

 

 

The display shows that the

The computer chip in the unit is not functioning normally.

Press the reset button on the unit (see p.5).

changer is being played, but no

 

 

sound can be heard.

 

 

 

 

 

The specified track will not

Random play or magazine random play has been

Turn off random play or magazine random play.

play.

selected.

 

 

 

 

Track repeat, disc repeat, track

The setting is not cancelled.

The settings for these functions remain on until the

scan, disc scan, random play,

 

setting to off or the disc ejected, even if the power is

and magazine random play

 

turned off or the source changed.

start by themselves.

 

 

 

 

 

If the following situations, consult your nearest service center:

•Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.

•Even though no device (KCA-S210A, CA-C1AX, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is entered when switching modes.

— 41 —

Page 40 Page 42
Image 41
Page 40 Page 42
Contents KDC-X615 KDC-6015 KDC-515S Contents 2Warning Do Not Load 3-in. CDs in the CD slot Safety precautionsTo prevent injury or fire, take the following precautions Cleaning the Unit Cleaning the Faceplate TerminalsCleaning the CD Slot Lens FoggingHandling Compact discs Power General featuresVolume AttenuatorAudio Control Setting Switching ModesBass/BAS Adjust the bass level Bass F Adjust the center frequency of the bassStoring your sound settings Non-Fading Output Mobile PresetLoudness Removing the Faceplate Theft Deterrent FaceplateReattaching the Faceplate Hiding the control panelSRC Tuner featuresAuto Memory Entry TuningStation Preset Memory Station Name Preset Play Snpp Switching Display for TunerCanceling mode during input Changing the DisplayAssigning Names Station Name Preset SnpsOperation CD/External disc control featuresPlaying CDs Playing Other Disc modeTrack Search Switching Display for DiscsFast Forwarding and Reversing Disc Play Track / Disc Repeat Canceling Direct Disc Search While It Is OperatingMaking a Reverse Disc Search Making a Forward Disc SearchRandom Play Track ScanText Scroll Disc Name Preset Play DnppTo scroll automatically To scroll manuallyTo cancel Dnpp mode Press the Dnpp button Presetting Disc Names Dnps Menu settings Touch Sensor Tone Manual Time AdjustmentMenu System Adjusting the date Calendar AdjustmentCalendar Mode Entering the month or day setting mode Memo ModeSecurity Code Inputting / Changing the textSelectable Illumination If you press the Reset button or remove the batterySwitching preout Contrast AdjustmentSwitching Graphic Display DimmerExternal Amp Control Clean Reception System Circuit CrscLoading and Replacing the Batteries Basic Operations of remoteBasic operations Tuner features CD/External disc control features Installation Procedure AccessoriesACC Connecting Wires to TerminalsInstalling in Japanese-Made Cars InstallationRemoving the Unit Removing the hard rubber frameInstallation Problem Possible Cause Solution Troubleshooting GuideCD/MD/External disc control mode Blank Audio section FM tuner sectionAM tuner section CD player sectionPage Page Page Page Page

KDC-515S, KDC-X615, KDC-6015 specifications

The Kenwood KDC series of car audio receivers, including the KDC-X615, KDC-6015, and KDC-515S, sets a high standard for sound quality and user-friendly features. These models are designed to enhance your in-car audio experience, providing excellent sound performance and connectivity options for modern audio needs.

Starting with the KDC-X615, this model stands out with its vibrant display and intuitive controls. It supports high-resolution audio formats, ensuring that your music sounds as close to the original recording as possible. The KDC-X615 features Bluetooth connectivity for hands-free calling and audio streaming, allowing you to enjoy your favorite playlists without distractions. Additionally, it offers a 13-band equalizer and a digital sound processor, which enable precise adjustments to tailor the audio output according to personal preferences or specific genres. With its dual phone connection, switching between devices is seamless, making it perfect for multi-taskers.

Next in line is the KDC-6015, which offers many similar features but with a more streamlined design. It incorporates a clear and easy-to-read LCD display that enhances visibility, even in bright sunlight. The KDC-6015 boasts USB and AUX inputs for easy connection to portable devices, expanding your playback options. Like the KDC-X615, it also includes Bluetooth connectivity for hands-free functionality. This model is slightly more budget-friendly while still delivering impressive sound through its variable color illumination feature, which allows users to customize the look to match their car's interior.

Finally, the KDC-515S is an entry-level option that still doesn’t compromise on quality. This model provides a built-in CD player alongside AM/FM radio, allowing users to enjoy traditional media alongside digital formats. The KDC-515S features an adjustable 3-band EQ, enabling users to make basic audio adjustments according to preference. While it lacks some of the advanced Bluetooth functions found in its higher-end counterparts, it still offers an AUX input for external devices, making it ideal for those who are looking for a reliable and straightforward audio solution.

In summary, the Kenwood KDC series provides a wide range of features across its models, catering to various user needs. From the advanced wireless capabilities of the KDC-X615 to the essential functionality of the KDC-515S, each model embodies Kenwood’s commitment to delivering quality sound and versatility in car audio systems.
Top Page Image Contents