Kenwood KDC-X615, KDC-6015, KDC-515S Troubleshooting Guide, Problem Possible Cause Solution

Page 40

English

Troubleshooting Guide

What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

The power does not turn on.

The fuse has blown.

After checking for short circuits in the wires, replace the

 

 

 

fuse with one with the same rating.

 

 

 

 

No sound can be heard, or the

Attenuator is turned on.

Turn off Attenuator.

volume is low.

 

 

The fader or balance settings are set all the way to one

Reset the fader or balance settings.

 

 

 

 

side.

 

 

 

 

 

 

 

The input/output wires or wiring harness are connected

Reconnect the input/output wires or the wiring harness

 

 

incorrectly.

correctly. See the section on "Connecting Wires to

 

 

 

Terminals".

 

 

 

 

Nothing happens when the

The computer chip in the unit is not functioning normally.

Press the reset button on the unit (see p. 5).

buttons are pressed.

 

 

 

 

 

 

The sound quality is poor or

One of the speaker wires is being pinched by a screw in

Check the speaker wiring.

distorted.

the car.

 

 

 

 

 

 

 

The speakers are not wired correctly.

Reconnect the speaker wires so that each output

 

 

 

terminal is connected to a different speaker.

 

 

 

 

Radio reception is poor.

The car antenna is not extended.

Pull the antenna out all the way.

 

 

 

 

 

 

The antenna control wire is not connected.

Connect the wire correctly, referring to the section on

 

 

 

"Connecting Wires to Terminals".

 

 

 

The memory is erased when

The battery wire has not been connected to the proper

Connect the wire correctly, referring to the section on

the ignition is turned off.

terminal.

"Connecting Wires to Terminals".

 

 

 

 

 

 

The ignition and battery wire are incorrectly connected.

Connect the wire correctly, referring to the section on

 

 

 

"Connecting Wires to Terminals".

 

 

 

 

A CD ejects as soon as it is

The CD is upside-down.

Load the CD with the labeled side up.

loaded.

 

 

The CD is quite dirty.

Clean the CD, referring to the section on "Cleaning CDs"

 

 

 

 

 

(see p. 6).

 

 

 

 

The sound skips on a CD.

The CD is scratched or dirty.

Clean the CD, referring to the section on "Cleaning CDs"

 

 

 

(see p. 6).

 

 

 

 

A track will not play.

Random play has been selected.

Turn off random play.

 

 

 

 

— 40 —

Page 39 Page 41
Image 40
Page 39 Page 41
Contents KDC-X615 KDC-6015 KDC-515S Contents 2Warning To prevent injury or fire, take the following precautions Safety precautionsDo Not Load 3-in. CDs in the CD slot Cleaning the Faceplate Terminals Cleaning the UnitCleaning the CD Slot Lens FoggingHandling Compact discs General features PowerVolume AttenuatorSwitching Modes Audio Control SettingBass F Adjust the center frequency of the bass Bass/BAS Adjust the bass levelStoring your sound settings Loudness Mobile PresetNon-Fading Output Theft Deterrent Faceplate Removing the FaceplateReattaching the Faceplate Hiding the control panelTuner features SRCStation Preset Memory TuningAuto Memory Entry Switching Display for Tuner Station Name Preset Play SnppCanceling mode during input Changing the DisplayStation Name Preset Snps Assigning NamesCD/External disc control features OperationPlaying Other Disc mode Playing CDsFast Forwarding and Reversing Disc Play Switching Display for DiscsTrack Search Canceling Direct Disc Search While It Is Operating Track / Disc RepeatMaking a Reverse Disc Search Making a Forward Disc SearchTrack Scan Random PlayDisc Name Preset Play Dnpp Text ScrollTo scroll automatically To scroll manuallyTo cancel Dnpp mode Press the Dnpp button Presetting Disc Names Dnps Menu settings Menu System Manual Time AdjustmentTouch Sensor Tone Calendar Mode Calendar AdjustmentAdjusting the date Memo Mode Entering the month or day setting modeSecurity Code Inputting / Changing the textIf you press the Reset button or remove the battery Selectable IlluminationContrast Adjustment Switching preoutSwitching Graphic Display DimmerClean Reception System Circuit Crsc External Amp ControlBasic operations Basic Operations of remoteLoading and Replacing the Batteries Tuner features CD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation Installing in Japanese-Made CarsRemoving the hard rubber frame Removing the UnitInstallation Troubleshooting Guide Problem Possible Cause SolutionCD/MD/External disc control mode Blank FM tuner section Audio sectionAM tuner section CD player sectionPage Page Page Page Page

KDC-515S, KDC-X615, KDC-6015 specifications

The Kenwood KDC series of car audio receivers, including the KDC-X615, KDC-6015, and KDC-515S, sets a high standard for sound quality and user-friendly features. These models are designed to enhance your in-car audio experience, providing excellent sound performance and connectivity options for modern audio needs.

Starting with the KDC-X615, this model stands out with its vibrant display and intuitive controls. It supports high-resolution audio formats, ensuring that your music sounds as close to the original recording as possible. The KDC-X615 features Bluetooth connectivity for hands-free calling and audio streaming, allowing you to enjoy your favorite playlists without distractions. Additionally, it offers a 13-band equalizer and a digital sound processor, which enable precise adjustments to tailor the audio output according to personal preferences or specific genres. With its dual phone connection, switching between devices is seamless, making it perfect for multi-taskers.

Next in line is the KDC-6015, which offers many similar features but with a more streamlined design. It incorporates a clear and easy-to-read LCD display that enhances visibility, even in bright sunlight. The KDC-6015 boasts USB and AUX inputs for easy connection to portable devices, expanding your playback options. Like the KDC-X615, it also includes Bluetooth connectivity for hands-free functionality. This model is slightly more budget-friendly while still delivering impressive sound through its variable color illumination feature, which allows users to customize the look to match their car's interior.

Finally, the KDC-515S is an entry-level option that still doesn’t compromise on quality. This model provides a built-in CD player alongside AM/FM radio, allowing users to enjoy traditional media alongside digital formats. The KDC-515S features an adjustable 3-band EQ, enabling users to make basic audio adjustments according to preference. While it lacks some of the advanced Bluetooth functions found in its higher-end counterparts, it still offers an AUX input for external devices, making it ideal for those who are looking for a reliable and straightforward audio solution.

In summary, the Kenwood KDC series provides a wide range of features across its models, catering to various user needs. From the advanced wireless capabilities of the KDC-X615 to the essential functionality of the KDC-515S, each model embodies Kenwood’s commitment to delivering quality sound and versatility in car audio systems.
Top Page Image Contents