Samsung SVD-4700 manual Comm ADJ Image ADJ, Switch, Screen

SHARPNESS SETUP

Operating Your Camera

•INT : Internal synchronization

•LL : External line-lock synchronization

·If you choose 'LL', you can adjust the desired phase. Press the SET button.

·You can adjust the desired phase from 0 to 359.

COMM ADJ (Communication Adjustment) :

This function sets up the camera communication status when controlling the camera through an external controlled device.

When the SPECIAL menu screen is displayed, by moving the up or down direction of the Function Setup Switch so that the arrow indicates ‘COMM ADJ’.

COMMUNICATION SETUP

▶PROTOCOL	STW
CAM ID	1
BAUD RATE	9600
UART MODE	8-N-1
RET PKT	DISABLE
RETURN

-RET PKT : You can choose whether to send an ACK signal when the communication control command is issued to the camera.

IMAGE ADJ : Includes image quality or special function factors.

SPECIAL SETUP
PRIVACY	OFF
DAY/NIGHT	AUTO
DIS	OFF
SYNC	INT
COMM ADJ
IMAGE ADJ

Set up the mode moving the 4 direction of Function Setup Switch.

-CAM ID : Determines the camera's identification number (between 0 and 255).

-Protocol : Select the communication PROTOCOL. (STW/PELCO-D/PELCO-P/ BOSCH/ HONEYWELL/VICON/AD/SEC/PANASONIC)

-BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.

-UART MODE : You can select NONE, EVEN or ODD for the parity bits.

MONITOR CRT

 When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by moving the up or down direction of the Function Setup Switch so that the arrow indicates 'IMAGE ADJ.

 Select a desired mode by moving the up or down direction of the Function Setup

Switch.
- H-REV : You can flip the picture horizontally on the
	IMAGE SETUP
screen.	▶H-REV	OFF
- V-REV : You can flip the picture vertically on the screen.	V-REV	OFF
- SHARPNESS : As you increase this value, the picture	SHARPNESS	ON
	RETURN
outline becomes stronger and clearer.

▶LEVEL 16

RETURN

COLOR DOME CAMERA 36 User Guide COLOR DOME CAMERA 37 User Guide