axis international marketing 2110 Installing Your Camera on a Network, These commands Line Syntax

Network Indicator

window. Network connector

‘Request timed

You will now see

In some Unix systems, the arp command can be located in a directory that is not on the command path; e.g: /usr/sbin/arp

Note:

out ...’ messages repeatedly returned within the DOS

For details on installing the AXIS 2110 to a modem, see page 2.

Note the Serial number on the underside of the unit. You need to know this to set the IP address:

Serial number same as Ethernet number; e.g.

00408c100086 =

00-40-8c-10-00-86

AXIS 2110 Installation Guide - English Page 1 of 5

Installing Your Camera on a Network

Follow the guide below to quickly install your AXIS 2110 on an Ethernet network:

Important!

Using an appropriate method for your operating system, assign your product with a unique IP

Address from a computer on your network, as follows:
￿Windows 95, 98, NT and 2000 only - Start a DOS window and type		UNIX only - Type these commands in your command
these commands:		line:
	Syntax:		Syntax:
	arp -s <Server IP address> <Ethernet address> <my PC IP address>		arp -s <IP address> <Ethernet address> temp
	ping -t <Server IP address>		ping <IP address>
￿
			Example:
Example:
	arp -s 172.21.1.200 00-40-8c-10-00-86 172.21.1.193		arp -s 172.21.1.200 00:40:8c:10:00:86 temp
	ping -t 172.21.1.200		ping 172.21.1.200

Connect an Ethernet cable to your AXIS ￿2110 and attach it to the network.

Connect the external Power Supply to the ￿unit and connect it to your main power supply.

RJ-45 connectorPower Supply Connector

Approximately 10-15 seconds after connecting the power supply, the message ‘Reply from 172.21.1.200...’ - or similar, is returned within the DOS window. Ensure that the Power Indicator is permanently lit and that the Network Indicator flashes intermittently.

Exit Ping. The installation is now complete, and you are ready ￿to access the AXIS 2110 from your Web browser, as described in the next section￿.

Power Indicator