axis international marketing 2110 manual Refining the Dial-Up Networking Properties

AXIS 2110 Installation Guide - English Page 4 of 5

Refining the Dial-Up Networking Properties...

Having created the Dial-Up connection for your AXIS 2110, follow the steps below to refine the connection properties:

	From the Dial-Up Networking dialog, right click the dedicated
Dial-Up connection previously created for your AXIS 2110 (Axis-								Click TCP/IP settings and then check
Camera was the connection created used in this and previous								the Server assigned IP address, and Server
examples). Select Properties.								assigned name server addresses radio
								buttons.
				Click the Server Types tab. From the
				drop-down list, select PPP as the Type
￿				of Dial-Up Server.
				In the Advanced options field, check			￿Check the Use IP header compres-
			￿
			Enable software compression. All other					sion and Use default gateway on a
			checkboxes should remain unchecked.
					￿			remote network checkboxes. Click OK.
		In the Allowed network protocols field,				Click the Scripting tab and ensure that the Start
				￿
		check the TCP/IP checkbox. NetBEUI and IPX/			terminal screen minimized checkbox is checked. Click OK
		SPX checkboxes should remain unchecked.			to exit Dial-Up Networking￿				Properties.

Initiating the Dial-Up Connection...

Important!

Please ensure that the Null Modem Cable is correctly installed and that the relative connection properties are cor-

rectly configured before initiating a Dial-Up connection. Step-by-step instructions on how to do this are provided
on the preceding￿pages of this section.		￿
	Double-click My Computer and then		Enter a Username and Password,
	double-click the Dial-Up Networking icon.		￿
			using the default root and pass
			respectively.
	Double-click the Dial-Up connection icon
			￿
	￿
	previously created for your AXIS 2110		Click Connect to initiate the
	￿(AxisCamera in this and previous examples).		Dial-Up connection.

Verifying the Modem Connection...

Having initiated your Dial-Up connection as described above, you can quickly check the connection by accessing the AXIS 2110 from a standard browser; such as Netscape or Internet Explorer, as follows:

Since the AXIS 2110 emulates a DNS server, you can type in ￿￿any URL (that includes a period) into your browser to display the AXIS 2110 Home Page, as shown here.

abc.xyz

Now, configure the unit using the Installation Wizard or the Administration Tools.