LTC 9384 Series Instruction Manual Installation
Maximum Camera/Lens Size:
LTC 9384/xx:
Accepts cameras up to 64W x 54H mm (2.5 x 2.1in.), lenses up to 67W x 75H mm (2.6 x 2.9in.), and camera/lens combinations up to 292mm (11.5in.).
LTC 9384/20NT:
Accepts cameras up to 64W x 54H mm (2.5 x 2.1in.), lenses up to 67W x 75H mm (2.6 x 2.9in.), and camera/lens combinations up to 355mm (14.0in.).
5.2Tools Required
•Flat blade screwdriver
•Phillips head screwdriver
•5⁄32in. (or 4mm) hex wrench
•5⁄16in. (or 8mm) hex wrench
•Adjustable wrench
•Wire cutter/stripper/crimper tool
5.3Cable Requirements
Video Transmission (Coaxial) | |
|
|
Cable Type | |
| |
|
|
Cable Size | Outside diameter between 4.6mm |
| (0.181in.) and 7.9mm (0.312in.) |
|
|
Cable Shape | Round |
|
|
Shield | ≥ 93% Braided Copper Shield |
|
|
Center Conductor | Stranded Copper Center |
|
|
DC Resistance | ≥ 15Ω/1000ft |
| ≥ 6Ω/1000ft |
|
|
Cable Impedence | 75Ω |
|
|
Agency Rating | UL |
|
|
Environmental | Outdoor rated |
|
|
Temperature Rating | ≥ 80 °C (176 °F) |
|
|
Sources | Belden 9259 |
| Belden 9238 |
|
|
|
|
Input Power Cord - North American | |
|
|
Cable Type | |
|
|
Cable Size | Outside diameter between 4.3mm |
| (0.170in.) and 11.9mm (0.470in.) |
|
|
Cable Shape | Round |
|
|
Conductors | 3 conductor version and |
| 2 conductor version |
|
|
Agency Rating | UL/C.S.A., UL |
|
|
Environmental | Outdoor rated |
|
|
Temperature Rating | 105 °C (221 °F) |
|
|
Voltage Rating | 300 V |
|
|
Sources | Belden 19506 |
| Belden 19509 |
| Northwire 573939 |
|
|
|
| EN 8 | |
|
|
|
|
|
|
| |
Input Power Cord - European |
| ||
|
|
| |
Cable Type |
| ||
|
| ||
|
|
| |
Cable Size | Outside diameter between 4.3mm |
| |
| (0.170in.) and 11.9mm (0.470in.) |
| |
|
|
| |
Cable Shape | Round |
| |
|
|
| |
Conductors | 3 conductor version and |
| |
| 2 conductor version |
| |
|
|
| |
Agency Rating | VDE |
| |
|
|
| |
Environmental | Outdoor rated |
| |
|
|
| |
Sources | Olflex 1600252 |
| |
| Olflex 1600253 |
| |
|
|
| |
|
|
| |
Lens Control Cable |
| ||
|
|
| |
Cable Type | Jacketed Multiconductor Cable |
| |
|
|
| |
Cable Size | Outside Diameter between 4.3mm |
| |
| (0.170in.) and 11.9mm (0.470in.) |
| |
|
|
| |
Cable Shape | Round |
| |
|
|
| |
Shield | Overall shielding |
| |
|
|
| |
Conductors | Stranded 20 to 16 AWG wire |
| |
|
|
| |
No. of Conductors | 4 and 8 |
| |
|
|
| |
Conductor Insulation | Color coded |
| |
|
|
| |
Sources | Belden 9552 |
| |
| Belden 9554 |
| |
5.4Cradle Removal
1.Remove the cradle from the housing by lowering the retaining screw completely on the bottom rear of the housing.
2.Remove the cradle assembly by pushing gently on the metal part of front cap and simultaneously grasping the rear handle and pulling the cradle assembly out of the housing. Be sure to keep the edges of the endcaps clean and free of scratches (see FIGURE 1).
Retention Screw