Axis Communications P1224-E user manual Hardware Overview, Shorten Sensor Unit Cable

Page 5

AXIS P1224–E Network Camera

Hardware Overview

1Power indicator LED

2Status indicator LED

3Network indicator LED

4SD card slot (microSD card)

5Camera connector

6I/O connector

7Main unit

8Network connector (PoE)

9Control button

10Power connector

11Mounting rail

12Sensor unit

13Cover

Shorten Sensor Unit Cable

The sensor unit is delivered with a cable. To shorten the cable follow these steps:

1.Cut the cable to the desired length. Measure from the sensor unit.

2.Strip the plastic outer coating from the end of the cable.

3.Peel back the shield.

4.Flatten the colored wires in the order described below.

1Brown

2White/brown

3Not used

4Not used

5White/blue

6Blue

5.Insert the wires all the way into a shielded 6P6C RJ12 connector.

Image 5

Contents Axis P1224-E Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P1224-E Network Camera Table of ContentsShorten Sensor Unit Cable Hardware OverviewNetwork Connector Connectors and ButtonsRJ12 Connector ConnectorSD Card Slot LED IndicatorsControl Button Color IndicationAccess from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordLive View Set Power Line FrequencyControls on the Live View Click Use HttpsAxis Media Control viewer toolbar Go to Setup EventsManual Trigger AMC Audio ControlsAxis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream Axis P1224-E Network Camera Basic Setup Setting Up the ProductVideo Stream VideoPixel Counter Image264 Camera SettingsStream Profiles Overlay Exposure SettingsImage Appearance White BalanceGo to Video Overlay Image Privacy MaskOverlay Image Axis P1224-E Network Camera Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links Camera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P1224-E Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P1224-E Network Camera Events Recipients Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with actionSchedules Setting Up an Email RecipientRecurrences Go to Events Recipients and click AddGo to Events Recurrences and click Add Recording List RecordingsContinuous Recording Go to Recordings ListSecurity System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration Axis Video Hosting System AvhsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourGo to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card Support MaintenancePorts & Devices System Overview AdvancedLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsEmergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Video Camera SettingsStorage disruption Storage and disk management problemsTechnical Specifications Installation Function/group SpecificationsMaintenance Built-in Installation aids General CasingFunction Pin Specifications ConnectorsFunction/group Specifications Warranty Performance Considerations M3.2

Related manuals

Manual 104 pages 43.64 Kb