Axis Communications M3007-P user manual Events

Page 34

AXIS M3007–P

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available action rule triggers and conditions include:

•Applications – Use installed applications to trigger the rule. See Applications, on page 32.

•Detectors

-Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut filter on) and night mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected to an output port.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection, on page 29.

-Tampering – Trigger the rule when tampering is detected. See Camera Tampering, on page 29.

•Hardware

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

•Input Signal

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page, on page 9 . This can for example be used to validate actions during product installation and configuration.

•PTZ

•Storage

-Available – Trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full – Trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked – Trigger the rule if the storage device is locked (write protected).

•System

-System Initializing – Trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence – Trigger the rule periodically. See Recurrences, on page 37. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 37.

Available actions include:

•PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. See Guard Tour, on page 28.

•Record Video – Record video to a selected storage.

34

Image 34

Contents Axis M3007-P Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M3007-PHardware Overview Connectors and ButtonsHardware Overview SD Card Slot LED IndicatorsNetwork Connector Control ButtonAccessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetClick Create self-signed certificate Live View Set Power Line FrequencyControls on the Live View PTZ Controls Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAxis M3007-P Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M3007-P Setting Up the Product Setting Up the ProductBasic Setup Video Stream Setting Up the Product VideoPixel Counter Overview View modesPanorama Double Panorama Quad ViewImage Direction264 MjpegImage Appearance Camera SettingsStream Profiles White BalanceShutter & Gain Exposure SettingsView areas Set Shutter toGo to Video Video Stream and select the Image tab OverlayOverlay Image Go to Video Overlay ImagePrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsBrowser Viewer Description PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls PTZ Pan Tilt Zoom Guard TourAdvanced Go to PTZ Guard Tour and click AddCamera Tampering DetectorsDetectors Motion DetectionGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionLow level 0% Default valuesMedium level 50% Recommended valuesApplications Install ApplicationApplications Application LicensesAxis M3007-P Events EventsFallback Action Setting Up an Action RuleRecipients Go to Events Action Rules and click AddRecipient Use with action Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click Add Events SchedulesRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingClick Save to save and start the recording Languages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeCertificates Go to Setup System Options Security Certificates Date & TimeBasic TCP/IP Settings NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share System Options StorageSD Card Go to System Options Storage and click SD CardSupport Overview MaintenanceSupport System OverviewScripting Plain ConfigLogs & Reports File UploadSystem Options Reset to Factory Default Settings Checking the Firmware TroubleshootingTroubleshooting Upgrading the FirmwareProduct is accessible locally but not externally Problems setting the IP addressProduct cannot be accessed from a browser Problems with streaming H.264Storage and disk management problems Video and image problems, generalVideo Camera Settings Key framesTechnical Specifications Technical SpecificationsInstallation aids Data Streaming Function/group SpecificationsMaintenance Built-in PowerTechnical Specifications Performance Considerations M4.5