AXIS M3014 Network Camera
Events
For more information, see the online help 
.
Triggers
Available action rule triggers and conditions include:
•Applications – Use installed applications to trigger the rule. See Applications on page 27.
•Detectors
-Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 24.
-Tampering – Trigger the rule when tampering is detected. See Camera Tampering on page 24.
•Hardware
-Network – Trigger the rule if network connection is lost or restored.
•Input Signal
-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page on page 9 . This can for example be used to validate actions during product installation and configuration.
•PTZ
-Moving – Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.
-Preset Reached – Trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.
•Storage
-Available – Trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.
-Full – Trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.
-Locked – Trigger the rule if the storage device is locked (write protected).
•System
-System Initializing – Trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.
•Time
-Recurrence – Trigger the rule periodically. See Set Up Recurrences on page 32. This can for example be used to upload an image every 5 minutes.
-Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 31.
Actions
Available actions include:
•PTZ Control
-Preset Position – Go to a preset position.
-Guard Tour – Start a guard tour. See Guard Tour on page 22.
30