AXIS M3014 Network Camera
Events
•Record Video – Record video to a selected storage.
•Send Images – Send images to a recipient.
•Send Notifications – Send a notification message to a recipient.
•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.
Recipients
Recipients receive media files and notification messages. The following recipients are available:
Recipient | Use with action |
|
|
Email1 | Send Images |
| Send Notification |
|
|
FTP | Send Images |
|
|
HTTP | Send Images |
| Send Notification |
|
|
Network Share2 | Send Images |
TCP | Send Notification |
|
|
1.Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.
2.A network share can also be used as a storage device for recorded video. Go System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage on page 43 for more information about storage devices.
To add a recipient:
1.Go to Events > Recipients and click Add.
2.Enter a descriptive name.
3.Select a recipient Type.
4.Enter the information needed for the recipient type.
5.Click Test to test the connection to the recipient.
6.Click OK.
Create Schedules
Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside office hours. Use one of the predefined schedules or create a new schedule as described below.
To create a new schedule:
1.Go to Events > Schedules and click Add.
2.Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3.Click OK.
To use the schedule in an action rule, select the schedule from the Schedule
31