Axis Communications AXIS FD-R Setting the root password, Accessing the camera from the Internet

Page 8

AXIS 209FD/FD-R/FD-R M12 8

Setting the root password

1.When accessing the camera for the first time, the ‘Configure Root Password’ dialog appears.

Note: Before you enter your password at this point, you can secure configu- ration of the root password via HTTPS by creating a self-signed certifi- cate. To do so, click the Create self-signed certificate... button in the Create Certificate window, and then proceed as follows.

2.Enter a password and then re-enter, to confirm the spelling. Click OK.

3.The ‘Enter Network Password’ dialog appears. Enter the User name: root

Note: The default administrator user name root is permanent and cannot be deleted or altered.

4.Enter the password as set in step 2 above, and click OK. If the password is lost, the camera must be reset to the factory default settings. See Resetting to the factory default settings, on page 31.

5.If required, click Yes to install the AXIS Media Control (AMC). You will need administrator rights on the computer to do this.

Accessing the camera from the Internet

Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet you must configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System Options > Network > TCP/IP Advanced.

For more information, please see NAT traversal (port mapping) for IPv4, on page 28. See also the AXIS Internet Dynamic DNS Service at www.axiscam.net or, for Technical notes on this and other topics, visit the Axis Support Web at www.axis.com/techsup

The Live View page

Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible.

The Video format drop-down list allows the video format on the Live View page to be temporarily changed.

The manual Trigger button can trigger an event directly from the Live View page. This is configured from Setup > Live View Config > Layout.

The Snapshot button saves a snapshot of the video image currently being displayed. Right-click on the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AMC viewer toolbar is not available.

The AMC (AXIS Media Control) viewer toolbar is available in Microsoft Internet Explorer only. It displays the following buttons:

The Play/Stop button starts and stops the live video stream.

The Snapshot button saves a snapshot of the video image currently being displayed. The Snapshot function and the target directory for saving snapshots can be configured from the AMC Control Applet in the Windows Control Panel (Internet Explorer only).

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User’s Manual About this Document CanadaContents Description Key featuresProduct overview Overview Color Description LED IndicatorsSetup System Options LED settings Axis Media Control Accessing the CameraAccess from a browser Live View Setting the root passwordAccessing the camera from the Internet Axis 209FD/FD-R/FD-R M12 How to stream MPEG-4 Video StreamsAlternative methods of accessing the video stream MPEG-4 clientsMotion Jpeg Axis Media Control AMCConfiguring the camera Accessing the Setup linkImage Text Overlay SettingsVideo & Image Overlay/Mask Settings Overlay/MaskVideo Stream Upload and use an overlay/maskAdvanced CameraLighting Conditions Low Light BehaviorAxis 209FD/FD-R/FD-R M12 GOV Settings Live View Config Default Video FormatDefault Viewer Viewer SettingsHtml Examples External VideoAction Buttons User Defined LinksSequence Mode Event Config Event ServersEvent Types Triggered EventsHow to set up a triggered event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers Scheduled EventsCamera Tampering Axis 209 FD-R/FD-R M12 Motion Detection Object SizeTips System Options SecurityIP Address Filter ReferralsNetwork Basic TCP/IP Settings IP Address ConfigurationDate & Time Services Advanced TCP/IP SettingsHttp Smtp email QoS Quality of serviceQoS Settings LED Settings MaintenanceUPnP BonjourResetting to the factory default settings Unit connectorsUsing the Control Button SupportAxis 209FD/FD-R/FD-R M12 Troubleshooting Emergency recovery procedureChecking the firmware Upgrading the firmwareAxis Support Symptoms, Possible Causes and Remedial Actions Camera is accessible locally, but not externallyCamera is inaccessible BrowserMotion Detection triggers unexpectedly Poor quality snapshot imagesBrowser freezes Technical Specifications Specification ModelsSpecification Installation General performance considerations Optimizing your system BandwidthGlossary of Terms Etrax Ethernet Token Ring Axis Axis own microprocessorSee also IP Internet Protocol Megapixel See Pixel VOP See VOPSSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the networkAxis 209FD/FD-R/FD-R M12 Index Snmp
Top Page Image Contents