FLEXIDOME HD | Installation en 27 |
|
|
5.4Mount the camera module
1.Route the cable tree from the camera around the rear of the camera module and secure all cables.
2.For surface mounted units, place the surface mount ring over the mounting base.
–With a side connection, remove the tab at the side entrance; with a rear connection, leave it in place.
3.Use the fixing ring to secure the camera module to the mounting base:
–Align the screws in the fixing ring with the raised holes in the mounting base.
–Tighten the three screws with the supplied screwdriver bit (maximum torque 1
> 1 
> 1 
x3 | x3 |
Bosch Security Systems | Installation Manual |