30 en Installation | FLEXIDOME HD |
|
|
5.7Camera set-up
To help set up the camera for installation:
1.Connect a monitor to the 2.5 mm jack using the optional monitor cable (S1460) which provides a CVBS signal (for installation purposes).
2.Disconnect the internal network cable.
3.Connect an external network cable with power (PoE).
4.After
S1460
PoE
1.Menu button
2.Zoom (focal length) and Focus controls
(Position of these controls might differ depending on the lens type. To use the full extension of the focus range, use the lens slip ring or the auto back focus mechanism.)
Installation Manual | Bosch Security Systems |