Panasonic WV-NW484S operating instructions Adjust the focus

2 Adjust the focus.		(2) Focus lock lever
Adjust the focus at the same time as
pan and tilt adjustment.
Repeat steps (1) and (2) to adjust the
focus.		FAR
(1) Loosen the zoom lock lever, move	TELE	NEAR

the lens to the appropriate view	(1) Zoom lock lever
angle between TELE and WIDE,	WIDE

and tighten the lever.

(2) Loose the focus lock lever, rough- adjust the focus, and tighten the lever.

Note..............................................................................................................................

• When either the zoom or focus is changed, the other also is changed.

Repeat steps (1) and (2) to adjust. Fine-adjust the focus by ABF as follows.

...................................................................................................................................

3Press the ABF button.

The ABF LED (→ page 13) lights, the focus position is displayed at the

bottom of the adjustment monitor screen, and the back focus is automatically adjusted.

When connected to a network, the camera can be operated and checked from a PC.

Note..............................................................................................................................

•Pressing and quickly releasing the ABF button immediately starts ABF adjustment.

•If you hold down the ABF button for at least 2 seconds, ABF adjustment is started after

about 3 minutes. Use this for final adjustment after attaching the dome.

...................................................................................................................................

29