Axis Communications 212 PTZ Terminal connector Pinout, LED indicators, Pin Function Description

Page 7

AXIS 212 PTZ - Product Features

I/O terminal connector - Pinout

Pin	Function	Description

4	Transistor Out-	With a maximum load of 50mA and a maximum voltage of 24V DC, this output has an open-collector NPN transistor with the
	put	emitter connected to the GND pin. If used with an external relay, a diode must be connected in parallel with the load, for pro-
		tection against voltage transients.

3	Digital Input	Connect to GND to activate, or leave floating (or unconnected) to deactivate.

2	3.3V DC	Can be used to power auxiliary equipment, max 50mA.

1	GND

LED indicators

LED	Color	Description

Network	Green	Steady for connection to 100 Mbit/s network. Flashes for network activity.

	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.

	Unlit	No connection.

Status	Green	Shows steady green for normal operation.
		Note: The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. See the
		online help files for more information. Go to Setup > System Options > LED settings

	Amber	Steady during startup, reset to factory default or when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Network connector up

Note: The AXIS 212 PTZ must be mounted with the network connector facing upwards to achieve the correct image orientation.

7

Image 7

Contents Axis 212 PTZ About this Document Contents General performance considerations Product Features Audio Key features OverviewStatus indicator LED Microphone Power button connectorColor Description Terminal connector PinoutLED indicators Pin Function DescriptionAccess from a browser Accessing the CameraSetting the Password Axis Media Control Accessing the camera from the InternetLive View Control panel Pan/Tilt/Zoom controlsAMC audio controls Video Streams How to stream MPEG-4Axis Media Control AMC Alternative methods of accessing the video streamMPEG-4 clients Motion JpegAccessing the Setup tools ConfigurationVideo Stream Video and Image settingsText Overlay Settings Image AppearanceLow Light Behavior Overlay Image SettingsAdvanced Camera Settings Advanced MPEG-4 Settings GOV SettingsAudio Audio SettingsEnable Audio Audio modeAudio Output Audio InputCustomizing the default Live View ConfigLayout Output Buttons Default Video FormatUpload Own Web Files Action ButtonsHtml Examples Sequence ModeDefault Viewer AMC SettingsAdvanced Ctrl Panel PTZ ConfigurationPreset Positions Guard TourEvent Servers Event ConfigurationDefinitions Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Motion DetectionObject Size Port StatusReferrals System OptionsSecurity IP Address FilteringNetwork Advanced TCP/IP Settings Network Basic TCP/IP SettingsDate & Time NAT traversal port mapping NTP ConfigurationHost Name Configuration Link-Local AddressNetwork Traffic Smtp emailBonjour LED SettingsMaintenance UPnPSupport Using the Control Button Resetting to the Factory Default SettingsAdvanced Terminal connector I/O Terminal ConnectorPinout and Interface Upgrading the Firmware TroubleshootingEmergency Recovery Procedure Checking the FirmwareAxis Support No images displayed on web Problems setting the IP addressProblems with the MPEG-4 format Camera is inaccessiblePoor quality snapshot images Video/Image problems, generalProblems uploading files Audio volume too low/highIllumination Technical SpecificationsVideo management General performance considerationsBandwidth Optimizing your systemEtrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsSee also IP Internet Protocol VOP See VOP URL Uniform Resource Locator An address on the network SSL/TSL Secure Socket Layer/Transport Layer SecurityNumber, the more secure the encryption AMC IndexSnmp

Related manuals

Manual 55 pages 47.3 Kb