AXIS 212 PTZ - Live View Config
Live View Config
Layout
These are the tools for deciding the layout of the
Live View page. The layout can be set in 3 ways:
•Use Axis look - the layout is unchanged.
•Use custom settings - modify the default page with your own colors, images etc. Click the Con- figure button and see the following page.
•Own Home Page - Upload and use your own cus- tom page as the default web page. Click the Con- figure button and see the following page.
Use custom settings
To change the background picture, banner, colors, etc., adjust the settings under Modify the Axis look.
To use your own file for e.g. a banner, first upload it (see the next page) or select External and enter the path to the file.
Upload Own Web Files
Your own web files, background pictures etc., must first be uploaded to the AXIS 212 PTZ in order to be available for selection in the Custom Settings setup dialog. Once uploaded, the files are shown in the
1.Enter the path to the file, e.g. a file located on your workstation or click the Browse button.
2.Select the user level for the uploaded file. Setting the user access level means that you have complete control over which pages can be viewed by which users.
3.When the path is shown correctly in the text field, click the Upload button.
All uploaded files are shown in the list in the lower section of the page. To remove a file, check the box provided next to it and then click the Remove button.
•To use your uploaded file, click the radio button and select the file from the
•To use an external file located somewhere other than in the AXIS 212 PTZ, click the radio button and enter the URL by External.
Note: Unchecking the box for Show setup link removes the link from the camera’s web pages. The setup tools will then only be accessible by entering the full setup address into the address/URL field of a browser, i.e. http://<ip address>/operator/basic.shtml
21