Axis Communications 214 PTZ user manual About this Document

Page 2

About this Document

This manual is intended for administrators and users of the AXIS 214 PTZ PTZ Network Camera, and is applicable for software release 4.40. Previous experience of networking will be of use when installing and using this product. Some knowledge of UNIX or Linux-based systems may also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the product. Important! - Indicates a hazard that can seriously impair operation. Do not proceed beyond any of the above notices until you have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.

This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information.

This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see http://www.opensource.apple.com/apsl/).

The source code is available from: http://developer.apple.com/darwin/projects/bonjour/

Legal Considerations

Video surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

Electromagnetic Compatibility (EMC)

If use of this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit to the receiver. Consult your dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at his own expense.

Canada - This Class A digital apparatus complies with Canadian ICES-003.

Europe - This digital equipment fulfills the requirements for radiated emission according to limit A of EN55022/1998, and the requirements for immunity according to EN55024/1998 residential, commercial, and industry. Warning! This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Japan - This is a class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective action.

Australia - This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998 AS/NZS 3548. Warning! This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Liability

Every care has been taken in the preparation of this manual. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Trademark Acknowledgments

Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, OS/2, UNIX, Wfine, Windows, WWW are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Axis Communications AB is independent of Sun Microsystems Inc. UPnPTM is a certification mark of the UPnPTM Implementers Corporation. Bonjour is a trademark of Apple Computer Inc.

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

•download user documentation and firmware updates

•find answers to resolved problems in the FAQ database. Search by product, category, or phrases

•report problems to Axis support by logging in to your private support area

Safety Notice - Battery Replacement

The AXIS 214 PTZ uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needs replacing. The battery should not be replaced unless required!

If the battery does need replacing, please observe the following:

•Danger of Explosion if battery is incorrectly replaced

•Replace only with the same or equivalent battery, as recommended by the manufacturer.

•Dispose of used batteries according to the manufacturer's instructions.

Visit Axis Support at www.axis.com/techsup/

RoHS

This product complies with both the European RoHS directive, 2002/95/EC, and the Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). This directive is applicable in the European Union member states.

The WEEE marking on this product (see right) or its documentation indicates that the product must not be disposed of together with household waste. To prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

Business users should contact the product supplier for information on how to dispose of this product correctly. This product should not be mixed with other commercial waste.

AXIS 214 PTZ User’s Manual

Revision 2.0

Part No: 29886

April 2007

Copyright© Axis Communications AB, 2006-2007

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Axis 214 PTZ About this Document Table of contents Axis 214 PTZ Product Description Network PowerRear panel StatusSetting the password for root Accessing the cameraAccessing the camera from a browser Accessing the camera from the InternetLive View Pan/Tilt/Zoom controlsViewer controls Control panelPTZ Control Queue Audio Stream Types Video and Audio StreamsVideo Stream Types Motion JpegAxis Media Control How to stream MPEG-4MPEG-4 protocols and communication methods RTP+RTSPOther MPEG-4 clients Other methods of accessing the video streamAccessing the Audio Streams Audio transmission methodsSetup Tools Accessing the setup tools from a browserImage Appearance Video & Image settingsImage Overlay Image Overlay SettingsGo to Setup Video & Image Overlay Image Video StreamLighting Conditions Advanced Camera SettingsImage Settings Low Light BehaviorAudio Basic Audio SettingsEnable Audio Audio ChannelsAudio Output Advanced Audio SettingsAudio Input Noise canceller threshold value Noise canceller attenuation Layout Live View ConfigUse custom settings Upload Own Web FilesViewer Settings Default Video FormatDefault Viewer Own HomeExternal Video Sequence ModeHtml Examples PTZ Configuration Event servers Event configurationTerminology Triggered events How to set up a triggered eventEvent types Click Add triggered on the Event typesScheduled events How to set up a scheduled eventConfiguring Motion Detection Motion DetectionPort Status Motion Detection ParametersSecurity IP Address Filter System OptionsSecurity Users Security HttpsAxis 214 PTZ Radius Authentication processSecurity Services Network Basic TCP/IP SettingsIP Address Configuration Date & TimeNetwork Advanced TCP/IP Settings HttpFTP HttpsNAT Traversal port mapping RtspNetwork Smtp email Network QoS Quality of serviceNetwork Socks Network SnmpPorts & Devices I/O Ports MaintenanceNetwork Bonjour SupportAdvanced Resetting to the factory default settingsUsing the Control Button Connections Schematic connection diagramConnecting audio equipment Inputs and outputsUpdating the Firmware TroubleshootingChecking the Firmware Video Image Problems Symptoms, Possible Causes and Remedial ActionsAxis 214 PTZ cannot be accessed from a browser But not externallyAudio problems Bad snapshot imagesTechnical Specifications LensInstallation, management Processors and memoryGeneral performance considerations Optimizing your systemBandwidth Frame rates Motion JpegFrame rates MPEG-4 Glossary of Terms Etrax Ethernet Token Ring Axis Axis own microprocessorSee also IP Internet Protocol VOP See VOPMegapixel See Pixel SSL/TSL Secure Socket Layer/Transport Layer Security These URL Uniform Resource Locator An address on the networkAxis 214 PTZ Http API IndexFTP Server Full duplex Half duplex Host Name Html Examples Snapshot Pulse 8 Push to talk Referrals Restart Restore RTPSmtp Socks

214 PTZ specifications

The Axis Communications 214 PTZ is a sophisticated network camera designed for surveillance and security applications. This camera is equipped with advanced features that allow for flexible monitoring and exceptional image quality, making it a preferred choice for various environments including retail, transportation, and public spaces.

One of the standout features of the Axis 214 PTZ is its Pan-Tilt-Zoom capabilities. The camera can pan 360 degrees continuously and has a tilt range of 90 degrees, providing users with the ability to cover large areas. With its powerful zoom function, the camera can magnify subjects up to 36 times, making it easier to identify details from a distance. This is particularly useful for applications requiring detailed observation, such as monitoring entrances or tracking vehicles in a parking lot.

The 214 PTZ also boasts impressive image quality, supporting up to 4CIF resolution at full frame rate. It employs progressive scan technology and delivers clear images, even in challenging lighting conditions. This is further enhanced by features such as day/night functionality, which allows the camera to switch to infrared mode for low-light environments. The built-in wide dynamic range (WDR) capability helps to balance scenes with high contrast lighting, ensuring that both bright and dark areas are visible.

In terms of connectivity, the Axis 214 PTZ utilizes Power over Ethernet (PoE), simplifying installation and reducing cable clutter by allowing the camera to receive power and data through a single Ethernet cable. This enhances flexibility in camera placement as it eliminates the need for separate power supplies. Additionally, the camera supports various video compression formats, including H.264 and Motion JPEG, optimizing bandwidth usage while maintaining high-quality video streams.

Security is paramount in surveillance applications, and the Axis 214 PTZ is equipped with robust security features. It supports HTTPS encryption, ensuring that video feeds are secure from unauthorized access. The camera also includes tampering alarms and a secure access control system that can restrict user access based on specific permissions.

Lastly, the user-friendly interface and compatibility with various Axis Video Management Software solutions allow for seamless integration into existing security systems. The camera's robust construction ensures reliability in diverse weather conditions, making it an ideal choice for both indoor and outdoor applications. Overall, the Axis Communications 214 PTZ camera combines advanced surveillance technology with user-centric design to deliver a versatile and dependable security solution.
Top Page Image Contents