Axis Communications 214 PTZ user manual Event configuration, Terminology, Event servers

Page 25

AXIS 214 PTZ 25

Event configuration

This section describes how to configure the AXIS 214 PTZ for alarm and handling. The AXIS 214 PTZ can be configured to perform certain actions when certain types of events occur.

Terminology

•Event Type - A set of parameters describing how and when the AXIS 214 PTZ should perform cer- tain actions. An event type may result in a single event, or it may result in many, all depending on how often the conditions governing its behavior are met.

•Triggered Event Type - An event that is activated by a specific internal or external trigger condi- tion. For example by motion detection or by an external device such as a door switch or a sensor.

•Scheduled Event Type - An event that runs at a pre-programmed time.

•Action - What occurs when the event triggers, e.g. the upload of video images to an FTP server, email notification, etc.

Event servers

Event servers are used to e.g. receive uploaded image files and/or notification messages. To set up event server connections in your AXIS 214 PTZ, go to Setup > Event Configuration > Event Servers, and enter the required information for the selected server type.

Server type

Purpose

Required information

 

 

 

 

FTP server

• Upload of saved images

•

IP address/hostname

 

 

• Descriptive name of your choice

 

 

• User name and password (to FTP server)

 

 

• Upload path e.g. images/

 

 

•

Port number

 

 

• Use passive mode if there is a firewall between the camera and the FTP server

 

 

 

 

HTTP server

• Notification messages

•

Descriptive name of your choice

 

• Upload of saved images

•

URL

 

 

• User name and password (to HTTP server)

 

 

•

Proxy address/proxy port

 

 

• Proxy user name and password

 

 

 

 

TCP server

Notification messages

•

IP address/hostname

 

•

Descriptive name of your choice

 

 

•

Port number

 

 

 

 

For details on each setting, please refer to the online help available from each web page.

Note: Pre-trigger and post-trigger buffers will be lost if the connection to the event server fails.

When the setup is complete, the connection can be tested by clicking the Test button (the connection test will take approximately 10 seconds).

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Axis 214 PTZ About this Document Table of contents Axis 214 PTZ Product Description Rear panel PowerNetwork StatusAccessing the camera from a browser Accessing the cameraSetting the password for root Accessing the camera from the InternetPan/Tilt/Zoom controls Live ViewControl panel Viewer controlsPTZ Control Queue Video Stream Types Video and Audio StreamsAudio Stream Types Motion JpegMPEG-4 protocols and communication methods How to stream MPEG-4Axis Media Control RTP+RTSPAccessing the Audio Streams Other methods of accessing the video streamOther MPEG-4 clients Audio transmission methodsAccessing the setup tools from a browser Setup ToolsImage Video & Image settingsImage Appearance Go to Setup Video & Image Overlay Image Overlay SettingsOverlay Image Video StreamImage Settings Advanced Camera SettingsLighting Conditions Low Light BehaviorEnable Audio Basic Audio SettingsAudio Audio ChannelsAudio Input Advanced Audio SettingsAudio Output Noise canceller threshold value Noise canceller attenuation Use custom settings Live View ConfigLayout Upload Own Web FilesDefault Viewer Default Video FormatViewer Settings Own HomeHtml Examples Sequence ModeExternal Video PTZ Configuration Terminology Event configurationEvent servers Event types How to set up a triggered eventTriggered events Click Add triggered on the Event typesConfiguring Motion Detection How to set up a scheduled eventScheduled events Motion DetectionMotion Detection Parameters Port StatusSecurity Users System OptionsSecurity IP Address Filter Security HttpsAxis 214 PTZ Security Authentication processRadius IP Address Configuration Network Basic TCP/IP SettingsServices Date & TimeHttp Network Advanced TCP/IP SettingsNAT Traversal port mapping HttpsFTP RtspNetwork Socks Network QoS Quality of serviceNetwork Smtp email Network SnmpNetwork Bonjour MaintenancePorts & Devices I/O Ports SupportUsing the Control Button Resetting to the factory default settingsAdvanced Connecting audio equipment Schematic connection diagramConnections Inputs and outputsChecking the Firmware TroubleshootingUpdating the Firmware Axis 214 PTZ cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsVideo Image Problems But not externallyBad snapshot images Audio problemsLens Technical SpecificationsProcessors and memory Installation, managementOptimizing your system General performance considerationsFrame rates MPEG-4 Frame rates Motion JpegBandwidth Etrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsVOP See VOP See also IP Internet ProtocolMegapixel See Pixel URL Uniform Resource Locator An address on the network SSL/TSL Secure Socket Layer/Transport Layer Security TheseAxis 214 PTZ FTP Server Full duplex Half duplex Host Name Html Examples IndexHttp API Smtp Pulse 8 Push to talk Referrals Restart Restore RTPSnapshot Socks

214 PTZ specifications

The Axis Communications 214 PTZ is a sophisticated network camera designed for surveillance and security applications. This camera is equipped with advanced features that allow for flexible monitoring and exceptional image quality, making it a preferred choice for various environments including retail, transportation, and public spaces.

One of the standout features of the Axis 214 PTZ is its Pan-Tilt-Zoom capabilities. The camera can pan 360 degrees continuously and has a tilt range of 90 degrees, providing users with the ability to cover large areas. With its powerful zoom function, the camera can magnify subjects up to 36 times, making it easier to identify details from a distance. This is particularly useful for applications requiring detailed observation, such as monitoring entrances or tracking vehicles in a parking lot.

The 214 PTZ also boasts impressive image quality, supporting up to 4CIF resolution at full frame rate. It employs progressive scan technology and delivers clear images, even in challenging lighting conditions. This is further enhanced by features such as day/night functionality, which allows the camera to switch to infrared mode for low-light environments. The built-in wide dynamic range (WDR) capability helps to balance scenes with high contrast lighting, ensuring that both bright and dark areas are visible.

In terms of connectivity, the Axis 214 PTZ utilizes Power over Ethernet (PoE), simplifying installation and reducing cable clutter by allowing the camera to receive power and data through a single Ethernet cable. This enhances flexibility in camera placement as it eliminates the need for separate power supplies. Additionally, the camera supports various video compression formats, including H.264 and Motion JPEG, optimizing bandwidth usage while maintaining high-quality video streams.

Security is paramount in surveillance applications, and the Axis 214 PTZ is equipped with robust security features. It supports HTTPS encryption, ensuring that video feeds are secure from unauthorized access. The camera also includes tampering alarms and a secure access control system that can restrict user access based on specific permissions.

Lastly, the user-friendly interface and compatibility with various Axis Video Management Software solutions allow for seamless integration into existing security systems. The camera's robust construction ensures reliability in diverse weather conditions, making it an ideal choice for both indoor and outdoor applications. Overall, the Axis Communications 214 PTZ camera combines advanced surveillance technology with user-centric design to deliver a versatile and dependable security solution.
Top Page Image Contents