Axis Communications 243SA user manual Camera tampering, Motion detection

AXIS 243SA - Event configuration 35

Camera tampering

The camera tampering application generates an alarm whenever the camera is repositioned, or when the lens is covered, sprayed, or severely defocused.

You must create an event, (see “How to set up a triggered event” (page -31)), for the camera to send an alarm.

Motion detection

In the Motion Detection menu, you can configure the video source(s) for motion detection. The motion detection feature is used to generate an alarm whenever movement occurs (or stops) in the image. AXIS 243SA can use up to 10 motion detection windows.

•Include windows target specific areas within the image

•Exclude windows are areas to be ignored within the Include window

Once configured, the motion detection windows will appear in a list when motion detection is selected to trigger an event. See How to set up a triggered event above.