AXIS 243SA - System options 59
Resetting to the factory default settings
To reset the AXIS 243SA to the original default settings, go to the System Options > Maintenance web page (described in Maintenance, on page 56) or use the control button on the Axis video server, as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 243SA to the factory default settings using the Control Button.
1.Switch off the Axis video server by disconnecting power.
2.Press and hold the Control Button while reconnecting the power.
3.Keep the Control button pressed until the Status Indicator displays yellow (this may take up to 15 seconds).
4.Release the Control Button.
Control button
Status indicator
5.When the Status Indicator changes to Green (may take up to 1 minute), the process is complete and the Axis video server has been reset.
6.