Page 12 | AXIS 209FD/AXIS 209FD-R Installation Guide |
Complete the installation
1.Clean the dome with a dry soft cloth to remove dust and fingerprints and use a blower to remove any dust from the lens.
2.To absorb any moisture in the AXIS 209FD-R, remove the supplied silica gel sachet (dry bag) from the plastic bag and affix inside the cover, behind the dome.
3.Replace the cover and gently tighten the tamper-proof screws by hand (torque < 0.4 Nm), using the supplied allen key. In the AXIS 209FD-R, take care not to pinch the gasket.
The installation is now complete.
Affix dry bag here (AXIS 209FD-R)
Accessing the AXIS 209FD/FD-R from the Internet
Once installed, your AXIS 209FD/FD-R is accessible on your local network (LAN). To access the camera from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. Please refer to the documentation for your router for further instructions. For more information on this and other topics, visit the Axis Support Web at www.axis.com/techsup
