Axis Communications 207 user manual Focusing, Live View, To focus

Page 11

Focusing

AXIS 207 - Accessing the Camera 11

Focus Ring (inner ring)

Status Indicator (outer ring)

Small dot above the lens assembly.

Raised line on focus ring.

To focus:

Open a browser and examine the image. If required, adjust the focus ring until the focus is satisfactory.

Note: Upon delivery, the raised line on the focus ring is aligned with the dot above the lens, and the focus is set to infinity.

The Live View Page

Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible.

The Video Format drop-down list allows the video format on the Live View page to be temporarily changed.

The Output buttons control the output directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout.

Pulse - click this button to activate the output for a defined period of time, e.g. to switch on a light for 20 seconds.

Active/Inactive - click these buttons to manually start and stop a connected device, e.g. switch a light on/off.

The Trigger buttons can trigger an event directly from the Live View page. These are configured under Setup > Live View Config > Layout.

Image 11

Contents Axis 207 Network Camera User’s Manual About this Document Page Contents Axis 207 Key features Product FeaturesOverview Network LED indicatorsAccess from a browser Accessing the Camera3GPP Compatibility Setting the PasswordAccessing the camera from the Internet To focus FocusingLive View AMC audio controls Video Streams How to stream MPEG-4QuickTime & Real Player MPEG-4 clientsMotion Jpeg Axis Media Control AMCAlternative methods of accessing the video stream Axis Media Control ConfigurationAccessing the Setup tools Image Appearance Video and Image settingsOverlay Settings Test Advanced Camera SettingsAdvanced MPEG-4 Settings GOV Settings Video StreamGeneral Audio SettingsLayout Live View ConfigOwn Home Customizing the defaultUpload Own Web Files Output Buttons Default Video FormatDefault Viewer Action ButtonsHtml Examples Viewer SettingsMotion Detection Event ConfigurationWhen Triggered Triggered by Input PortAxis 207 Event Configuration Object Size History Sensitivity Motion DetectionPort Status Axis 207 Event Configuration ExamplesOperator System OptionsSecurity Date & TimeDNS Configuration Network Basic TCP/IP SettingsNetwork Advanced TCP/IP Settings IP Address ConfigurationNAT traversal port mapping NTP ConfigurationHost Name Configuration Link-Local AddressWAN internet Network Traffic QoS Quality of serviceBonjour LED SettingsSmtp email UPnPSupport MaintenanceConfiguration Advanced Resetting to the Factory Default SettingsUsing the Control Button Pinout and Interface I/O Terminal ConnectorTerminal Connectors Axis Upgrading the Firmware TroubleshootingBasic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureBrowser Camera is accessible locally, but not externallyDecode only I frames Power indicator is not constantly litCamera is inaccessible UsersNo audio Problems uploading filesAudio volume too low/high Is enabled under System Options Date & TimeVideo compression Technical SpecificationsApplications not included RequirementsSpecification MPEG-4 licensing Glossary of Terms Compression See Image Compression VOP See VOP Half-duplex See Full-duplexAxis 207 Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network An I-VOP is complete image frame Numerics IndexSystem Options