Axis Communications 207 user manual I/O Terminal Connector, Pinout and Interface

Page 36

36AXIS 207 - The I/O Terminal Connector

The I/O Terminal Connector

Pinout and Interface

The 4-pin I/O terminal connector provides the interface to:

•1 transistor output

•1 digital input

•auxiliary power and GND

The terminal connector is used in applications for e.g. motion detection, event triggering, time lapse recording, alarm notification via email, etc.

•Input - for connecting e.g. a pushbutton. If the pushbutton is pressed, the state changes and the input becomes active (shown under Event Configuration > Port Status).

•Output - connects e.g. an alarm device that can be activated by Output buttons on the Live View page, or by an Event Type. The output will show as active (Event Configuration > Port Status) if the alarm device is activated.

Function	Pin	Description	Pinouts

Transistor	4	With a maximum load of 100mA and a	The I/O terminal pins on the
Output		maximum voltage of 24V DC, this output	AXIS 207 are numbered as
		has an open-collector NPN transistor with	shown below.
		the emitter connected to the GND pin. If
		used with an external relay, a diode must be	4
		connected in parallel with the load, for pro-	1
		tection against voltage transients.	1

Digital Input	3	Connect to GND to activate, or leave float-
		ing (or unconnected) to deactivate.

GND	2

Auxiliary DC	1	5VDC/min 2.5W. Electrically connected in
Power Input		parallel with the connector for the PS-L
		power adapter, this pin provides an auxiliary
		connector for mains power to the unit. This
		pin can also be used to power auxiliary
		equipment, max 50mA.

Image 36

Contents Axis 207 Network Camera User’s Manual About this Document Page Contents Axis 207 Product Features Key featuresOverview LED indicators NetworkAccessing the Camera Access from a browserSetting the Password Accessing the camera from the Internet3GPP Compatibility Focusing Live ViewTo focus AMC audio controls How to stream MPEG-4 Video StreamsMPEG-4 clients Motion JpegAxis Media Control AMC QuickTime & Real PlayerAlternative methods of accessing the video stream Configuration Accessing the Setup toolsAxis Media Control Video and Image settings Overlay SettingsImage Appearance Advanced Camera Settings Advanced MPEG-4 Settings GOV SettingsVideo Stream TestAudio Settings GeneralLive View Config LayoutCustomizing the default Upload Own Web FilesOwn Home Default Video Format Default ViewerAction Buttons Output ButtonsViewer Settings Html ExamplesEvent Configuration When TriggeredTriggered by Input Port Motion DetectionAxis 207 Event Configuration Motion Detection Object Size History SensitivityAxis 207 Event Configuration Examples Port StatusSystem Options SecurityDate & Time OperatorNetwork Basic TCP/IP Settings Network Advanced TCP/IP SettingsIP Address Configuration DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local Address NAT traversal port mappingWAN internet QoS Quality of service Network TrafficLED Settings Smtp emailUPnP BonjourMaintenance ConfigurationSupport Resetting to the Factory Default Settings Using the Control ButtonAdvanced I/O Terminal Connector Pinout and InterfaceTerminal Connectors Axis Troubleshooting Basic ConfigurationChecking the Firmware Upgrading the FirmwareEmergency Recovery Procedure Axis SupportCamera is accessible locally, but not externally BrowserPower indicator is not constantly lit Camera is inaccessibleUsers Decode only I framesProblems uploading files Audio volume too low/highIs enabled under System Options Date & Time No audioTechnical Specifications Video compressionRequirements Applications not includedSpecification MPEG-4 licensing Glossary of Terms Compression See Image Compression Half-duplex See Full-duplex VOP See VOPAxis 207 Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network An I-VOP is complete image frame Index NumericsSystem Options