AXIS 207MW - Accessing the Camera 11
Focusing
Small dot above the lens assembly.
Raised line on focus ring.
Focus Ring (inner ring)
Status Indicator 
(outer ring)
To focus:
Open a browser and examine the image. If required, adjust the focus ring until the focus is satisfactory.
Note: Upon delivery, the raised line on the focus ring is aligned with the dot above the lens, and the focus is set to infinity.
The Live View Page
Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible.
The Video Format
The 2 different Output buttons control the output directly from the Live View page. These are configured from Setup > Live View Config > Layout.
Pulse - click this button to activate the output for a defined period of time, e.g. to switch on a light for 20 seconds.
Active/Inactive - click these buttons to manually start and stop a connected device, e.g. switch a light on/off.
The Trigger buttons can trigger an event directly from the Live View page. These are configured under Setup > Live View Config > Layout.
The Snapshot button shows a snapshot of the video image currently being displayed.