10X PTZ Network Camera SNP-1000A
AWC:
Set up the lighting to the objects and corrects the right colour temperature to that of a white object. Camera works under the setup conditions. For the most appropriate condition under the current illumination, capture the white paper and then change the mode into AWC. Press the Enter key and then AWC Start will be displayed. When the adjustment is completed after pressing the Enter key for AWC Start, go to the upper menu. When conditions change, adjust the white balance function again.
Manual
Fine tuning is possible through this manual control mode. Select the colour temperature and increase or decrease the Red or Blue values to shift the colour of the object.
-Red : Red Gain can be changed.
-Blue : Blue Gain can be changed.
White Balance may not function properly under the
Note following conditions.
When the colour temperature surrounding the object is very high. (e.g. clear sky, sunset)
When it is dark around the object.
When the camera is pointing towards a fluorescent lamp directly or when lighting conditions change a lot.
74