![](/images/new-backgrounds/1131710/13171073x1.webp)
Checking if the IP router is connected to the xDSL/Cable modem properly
Select <Status> from the Settings menu of the IP Router
yIf it is properly connected, <IP Address>, <Subnet Mask> and <Gateway> provided by your ISP are displayed. Please remember these values because they are required so that an external remote computer of the IP router connects to the camera. However, note that certain ISPs change the settings of <IP Address>, <Subnet Mask> and <Gateway> on a regular basis
yIf the IP router is not properly connected, press the [Connect] button to try to recon- nect or check if the settings of the IP router are correct.
CONNECTING THE CAMERA TO AN IP ROUTER WITH LOCAL AREA NETWORKING
This is for a large network environment such as corporate office, building, public office and factory.
Switch
HUB ![](/images/new-backgrounds/1131710/13171073xi2.webp)
![](/images/new-backgrounds/1131710/13171073xi3.webp)
INTERNET
| IP Router |
|
|
| 외External부 원격 PC |
|
| Firewall |
| Remote PC | |
|
Local PC
DDNSServer서버
(DataCenter, KOREA) (Data
Local PC
Configuring the network settings of the local PC connected to an IP router
Configuring the network settings of the local PC connected to an IP router, follow the instructions below.
y Select : <Network Neighborhood> <Properties> <Local Area Connection> <Properties> <General> <Internet Protocol (TCP/IP)> <Properties> <Obtain an IP address automatically> or <Use the following IP address>.
yFollow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the IP router is 192.168.1.1 IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
ex2) If the address (LAN IP) of the IP router is 192.168.0.1 IP address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1