![](/images/new-backgrounds/1131710/131710113x1.webp)
To configure the IP settings
1.Select <Basic> - <IP>.
The IP setup window appears.
y IP confi guration : Set the IP and port settings for the camera.
-IP type : Select one from <Static IP>, <Dynamic IP>, and <PPPoE IP>.
If you select <PPPoE IP>, you can provide the optional ADSL IP and password. However, the multicast items (multicast address, port, TTL) for VNP and RTP will disappear.
-MAC address : Displays the Ethernet MAC address.
This is used for creating a DDNS address.
-IP address : Displays the current IP address.
-Subnet mask : Displays the
<Subnet mask> for the set IP.
-Gateway : Displays the <Gateway> for the set IP.
-DNS server : Displays the DNS(Domain Name Service) server address.
-HTTP webserver port : HTTP port used to access the camera via the web browser. The default is 80(TCP).
-Upload port (TCP) : Used to upgrade the software fi rmware, defaulted to 60004(TCP).
yIPv6 confi guration : Obtains the IPv6 address to access the IPv6 network.
yVNP confi guration : Set a port used to transfer video signals with the Samsung protocols.
-Device port (TCP) : Used to control the video signal transfer, defaulted to 60001(TCP).
-TCP streaming port : Video signal transfer port using TCP protocols, defaulted to 60002(TCP).
-UDP streaming port : UDP Port used to transfer video signal with the UDP Unicast protocols. The default is 60003(UDP).
-Multicast address : IP address used to transfer video signal with the UDP Multicast protocols.
The default is 225.128.1.128, and if you want to change the address, specify it ranging from 224.0.0.0 to 239.255.255.255.
-Multicast port : UDP Port used to transfer video signal with the UDP Multicast protocols. The default is 60005(UDP).
-TTL* : Set the TTL for the VNP packet.
The default is 63, and if you want to change the address, specify it ranging from 0 to 255.
● SETUP SCREEN