Samsung SNC-B2335P user manual Day/Night, White BAL

camera setup

DAY/NIGHT

You can specify a recording mode according to the scene.

1. Select <CAMERA SET> - <DAY/NIGHT>.

2.Select a screen transition mode according to the illumination, and set options as appropriate.

y DAY : Fixed to DAY mode, regardless of the scene.

y NIGHT : Fixed to NIGHT mode, regardless of the scene.

If BURST is set to <ON>, the burst signal will output.

y AUTO : According to the luminance, this will switch DAY to NIGHT mode, or vice versa.

y DAY NIGHT / NIGHT DAY : If set to <AUTO>, you can specify the brightness level triggering the mode switch between DAY and NIGHT as well as the interval.

y MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed.

Any excessively bright area in a night scene will be masked.

AUTO
BURST	OFF
DAY NIGHT
BRIGHTNESS	MID
DWELL TIME	2S
NIGHT DAY
BRIGHTNESS	MID
DWELL TIME	5S
MASK AREA	1 2
MASK AREA
<SIZE>
<LOCATION>

WHITE BAL

If you need to adjust the screen brightness, use the WHITE BALANCE function.

1.Select <CAMERA SET> - <WHITE BAL>.

2.Select a mode where you set the balance.

y DAY : You can set the RED, and BLUE value in DAY mode.

y NIGHT : You can adjust the <WHITE BAL> according to the ambient luminance.

	WHITE BAL
DAY/NIGHT			DAY
MODE	[	00] ----	ATW2
RED			I ----
BLUE	[	00] ----	I ----

26_ camera setup