Samsung SNC-B2335P user manual To set the scheduled transfer

Page 65

yActivation time : Sets the operation time of the intelligent video analysis.

-Always : Confi gured action is performed whenever an intelligent video analysis event occurs.

-Only scheduled time : Confi gured action is performed when intelligent video analysis event occurs during the specifi ed time period.

yAction : You can confi gure the action for an intelligent video analysis event.

-Alarm output : Sets the alarm output port for the signaling the intelligent video analysis event.

-Output duration : Sets the alarm signal dwell time to the Alarm Output port on an intelligent video analysis event.

When another intelligent video analysis event follows the previous one, the output duration time is reset based on the most recent event.

-Alarm image transfer : If selected <Enable>, depending on your setting of <Event> - <Transfer setup>, the image in JPEG format will be sent to the registered address via FTP or e-mail (SMTP), or saved in the SD memory card.

SETUP SCREEN

To set the scheduled transfer

You can set to transfer the JPEG image to the FTP/SMTP server saved in the SD memory card at a specific interval.

1.Select <Event> - <Schedule>.

The Schedule Transfer setup window appears.

y Schedule transfer function :

If selecting <Enable>, the schedule transfer function will be activated; if selecting <Disable>, it will be deactivated.

y Transfer interval : You can set the time interval to transfer images.

You can set the unit of the interval to <seconds> or <minutes>; you can also set to transfer one image per 5/15/30/45/60 seconds, or one per 5/15/30/45/60 minutes. y Activation time : You can set a time to execute a specific command when a sched-

ule transfer event occurs.

-Always : Always sends an image at the set interval.

-Only scheduled time : Periodically transfers image only during the specifi ed time period.

2.When done, click [Apply]. Your settings will be saved.

English _65

Image 65
Contents Network Camera Overview English Overview FCC Statement Important Safety Instructions Contents Login Connecting to the cameraInstalling ActiveX Using the Live ScreenRecommended PC Specifications Product FeaturesPrecautions Installation and USE IP Installer CD Compatible PoE SwitchesWHAT’S Included Compatible IP RoutersAT a Glance ConnectorFront Side DescriptionSystem PowerRear Side GND Mounting the Lens Disconnect the power before proceedingMounting the CS lens Mounting the C lensFocusing Connecting the Auto Iris Lens connectorINSERTING/REMOVING AN SD Memory Card Inserting an SD Memory CardMemory Card Information not Included What is a memory card?Removing an SD Memory Card Selecting a memory card that’s suitable for youMemory Card Use Contacts Lock SwitchMemory Card Components SdhcConnecting to the monitor Connecting with Other DevicePower Supply Power NetworkMicrophone Connecting to Audio Input/OutputLINE-IN LINE-OUT Speaker Pre-AmpMicrophone Speaker Pre-Amp Audio I/O Block DiagramAlarm I/O Wiring Diagram Connecting to the I/O port boxYou can configure the camera settings using the Web Viewer HOW to USE the Menu KEYProfile Factory DefaultsMain Menu You can configure the general settings of the camera module Camera SetupCamera ID IrisDNR MotionShutter SENS-UPAny excessively bright area in a night scene will be masked DAY/NIGHTWhite BAL Detail Digital ZoomAGC Color SUP ReversePrivacy Zone Zone SetupSelect the Pixel Level You will see dots on the screenOthers Factory DefaultOSD Color You can set the font color of the user interfaceSystem Info  The camera type may different, depend on the video signalLanguage You can check the system informationNetwork connection and setup Select Status from the Settings menu of the IP Router Network connection and setupSetting the IP Router Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingURL IP Address SetupButtons used in IP Installer Auto Set Static IP SetupManual Network Setup English Auto Network Setup Dynamic IP Environment Setup Dynamic IP SetupManual Port Range Forwarding Port Range Forward Port Mapping SetupEx http//mfffe42.websamsung.net Connecting to the Camera from a Shared Local PCConnecting to the Camera from a Remote PC VIA the Internet Using URL Connecting to the CameraConnecting via URL If the Http port is other than Normally, you wouldTo check the Ddns address LoginFor Windows XP Service Pack 2 users Installing ActivexSetup Move to the Setup screen About Using the Live ScreenReset Alarm SD SearchTo capture the snapshot BackupTo record a video To print out the screenshotClick on the scene to record Recorded space, recording will be forcibly ended Click OKWeb viewer SD Search Viewer Screen layout Using the SD Search Viewer ScreenDefault Setup Accessing the Setup ScreenTo configure the video & audio settings Brightness from 1 to Contrast Adjust the contrast fromTo configure the IP settings Setup screen To set the user account Click Basic User User setup window appearsClick Basic Language When done, click Apply Selected language will be appliedTo set the display language To set the date/time System SetupAlarm occurrence 1, 2 When an alarm is generated To update the softwareTo check the log information Select System Log Log information list appearsAll Restores all settings to the default To reset the systemTo set the Https Click OK to restart the systemTo Set IP Filtering Overlay SetupTo set the text You can display text on the screenTo set the event transfer function Event SetupTo test the FTP transfer Click Test Verified will be displayedSetup screen To set an alarm image To setup the recordTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the Ddns Network SetupTo set the video transfer mode ITS DAY ModeGaming ALCBitrate Control CBRConstant Bitrate TerminologyCavlc English Specifications RAM CS/CDSP 4CIFHTTPS, SSL, Dhcp SetupARP, DNS, DDNS, Vsip DdnsSDK NtscHttp API GOP size15 MPEG4 4CIF Frame Rate NtscEstimationHPel FPS 30 FPS 15 FPSMPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL 25 FPS 13 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution TroubleshootingNTP must be properly configured Verify the settings in the following sequenceAlarm Video Transmission must be enabled Analysis settingGNU General Public License GPL/LGPL Software LicensePreamble We protect your rights with two stepsProgram, and can be reasonably Page Page END of Terms and Conditions No WarrantyHow to Apply These Terms to Your New Programs Preamble Terms and Conditions Protecting Users Legal Rights From Anti-Circumvention Law Source CodeBasic Permissions Conveying Non-Source Forms Conveying Verbatim CopiesConveying Modified Source Versions Installed in ROM Additional Terms Patents Acceptance Not Required for Having CopiesAutomatic Licensing of Downstream Recipients Use with the GNU Affero General Public License ValidNo Surrender of Others Freedom END of Terms and Conditions GNU Lesser General Public LicensePreamble Page Page Page Page Page How to Apply These Terms to Your New Libraries No Event Shall the OpenSSL OpenSSL LicenseCopyright C1995-1998 Eric Young Original SSLeay License
Related manuals
Manual 111 pages 21.4 Kb Manual 109 pages 60.28 Kb Manual 109 pages 16.11 Kb