Samsung SNC-B2335P user manual Overview

Page 4

overview

CAUTION

1.Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity. Doing so may cause ﬁ re or electric shock.

3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

4.Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause ﬁ re or damage to the product.

5.Keep out of direct sunlight and heat radiation sources. It may cause ﬁ re.

6.Install it in a place with good ventilation.

7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

8.Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.

10.When using the camera outdoors, moisture may occur inside the camera due to temperature difference between indoors and outdoors. For this reason, it is recommended to install the camera indoors. For outdoor use, use the camera with built- in fan and heater.

4_ overview

Image 4

Contents Network Camera Overview English Overview FCC Statement Important Safety Instructions Contents Connecting to the camera LoginInstalling ActiveX Using the Live ScreenPrecautions Installation and USE Product FeaturesRecommended PC Specifications Compatible PoE Switches IP Installer CDWHAT’S Included Compatible IP RoutersConnector AT a GlanceFront Side DescriptionRear Side PowerSystem GND Disconnect the power before proceeding Mounting the LensMounting the CS lens Mounting the C lensConnecting the Auto Iris Lens connector FocusingINSERTING/REMOVING AN SD Memory Card Inserting an SD Memory CardWhat is a memory card? Memory Card Information not IncludedRemoving an SD Memory Card Selecting a memory card that’s suitable for youContacts Lock Switch Memory Card UseMemory Card Components SdhcConnecting with Other Device Connecting to the monitorPower Supply Power NetworkConnecting to Audio Input/Output MicrophoneLINE-IN LINE-OUT Speaker Pre-AmpAudio I/O Block Diagram Microphone Speaker Pre-AmpConnecting to the I/O port box Alarm I/O Wiring DiagramHOW to USE the Menu KEY You can configure the camera settings using the Web ViewerMain Menu Factory DefaultsProfile Camera Setup You can configure the general settings of the camera moduleCamera ID IrisMotion DNRShutter SENS-UPWhite BAL DAY/NIGHTAny excessively bright area in a night scene will be masked Digital Zoom DetailAGC Color SUP ReverseZone Setup Privacy ZoneSelect the Pixel Level You will see dots on the screenFactory Default OthersOSD Color You can set the font color of the user interface The camera type may different, depend on the video signal System InfoLanguage You can check the system informationNetwork connection and setup Network connection and setup Select Status from the Settings menu of the IP RouterSetting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANButtons used in IP Installer IP Address SetupURL Manual Network Setup Static IP SetupAuto Set English Auto Network Setup Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingConnecting to the Camera from a Remote PC VIA the Internet Connecting to the Camera from a Shared Local PCEx http//mfffe42.websamsung.net Connecting to the Camera Using URLConnecting via URL If the Http port is other than Normally, you wouldLogin To check the Ddns addressInstalling Activex For Windows XP Service Pack 2 usersUsing the Live Screen Setup Move to the Setup screen AboutReset Alarm SD SearchBackup To capture the snapshotTo print out the screenshot To record a videoClick on the scene to record Recorded space, recording will be forcibly ended Click OKWeb viewer Using the SD Search Viewer Screen SD Search Viewer Screen layoutAccessing the Setup Screen Default SetupTo configure the video & audio settings Brightness from 1 to Contrast Adjust the contrast fromTo configure the IP settings Setup screen Click Basic User User setup window appears To set the user accountTo set the display language When done, click Apply Selected language will be appliedClick Basic Language System Setup To set the date/timeTo update the software Alarm occurrence 1, 2 When an alarm is generatedTo check the log information Select System Log Log information list appearsTo reset the system All Restores all settings to the defaultTo set the Https Click OK to restart the systemOverlay Setup To Set IP FilteringTo set the text You can display text on the screenEvent Setup To set the event transfer functionTo test the FTP transfer Click Test Verified will be displayedSetup screen To setup the record To set an alarm imageTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the video transfer mode Network SetupTo set the Ddns DAY Mode ITSGaming ALCCavlc TerminologyBitrate Control CBRConstant Bitrate English Specifications CS/C RAMDSP 4CIFSetup HTTPS, SSL, DhcpARP, DNS, DDNS, Vsip DdnsHttp API NtscSDK EstimationHPel Frame Rate NtscGOP size15 MPEG4 4CIF 30 FPS 15 FPS FPSMPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL 25 FPS 13 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Troubleshooting Problem SolutionVerify the settings in the following sequence NTP must be properly configuredAlarm Video Transmission must be enabled Analysis settingGPL/LGPL Software License GNU General Public LicensePreamble We protect your rights with two stepsProgram, and can be reasonably Page Page How to Apply These Terms to Your New Programs No WarrantyEND of Terms and Conditions Preamble Terms and Conditions Basic Permissions Source CodeProtecting Users Legal Rights From Anti-Circumvention Law Conveying Modiﬁed Source Versions Conveying Verbatim CopiesConveying Non-Source Forms Installed in ROM Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents No Surrender of Others Freedom ValidUse with the GNU Affero General Public License GNU Lesser General Public License END of Terms and ConditionsPreamble Page Page Page Page Page How to Apply These Terms to Your New Libraries OpenSSL License No Event Shall the OpenSSLOriginal SSLeay License Copyright C1995-1998 Eric Young

Related manuals

Manual 111 pages 21.4 Kb

Manual 109 pages 60.28 Kb

Manual 109 pages 16.11 Kb