Samsung SNC-B2335P user manual Setup screen

Page 60

setup screen

-Use passive mode : Select this option when the passive mode connection is inevitable due to the ﬁ rewall or FTP server setting.

-FTP server address : Enter the IP address of a FTP server to which an alarm image will be transferred.

-Upload path : You can specify the path of the FTP directory to which you will transfer an alarm image.

You can specify the path by just typing </directory name> or <directory name> in this ﬁ eld.

If nothing is speciﬁ ed, the path will be defaulted to the root directory of the FTP server.

-Port : The FTP port is defaulted to 21. This value can be changed according to the FTP server setting.

-User ID : Provide the user account ID to access the FTP server.

-Password : Provide the user account password to access the FTP server.

yE-mail(SMTP) transfer : With this setting, you can transfer alarm images to the email server. This function is available only for the SMTP email server. When the initial SMTP server setting and connection are not verified, the <Not verified> message appears.

-SMTP server address : Enter the SMTP server address to use when you send an email.

ex) 10.240.56.228

-Port : Enter a port number to use when you send an email. The default is 25.

-User ID : Provide the user account ID to access the SMTP server.

-Password : Provide the user account password to access the SMTP server.

-E-mail sender : Enter the address of the email sender. If the sender address is incorrect, the email from the sender may be classiﬁ ed as SPAM by the SMTP server and may not be sent.

-E-mail receiver : Enter the address of the email receiver.

-Title : Enter the subject of the email to send.

-Message : Enter the content of the email to send.

To test the email transfer

Click [Test].

This will test if the image is transferred to the specified SMTP server properly. When the test on the SMTP server connection and transfer is done, a message of <( Verified )> will be displayed.

You will see an error message if the test fails.

If this is the case, check the SMTP server status or the settings again.

60_ setup screen

Image 60

Contents Network Camera Overview English Overview FCC Statement Important Safety Instructions Contents Connecting to the camera LoginInstalling ActiveX Using the Live ScreenProduct Features Precautions Installation and USERecommended PC Specifications Compatible PoE Switches IP Installer CDWHAT’S Included Compatible IP RoutersConnector AT a GlanceFront Side DescriptionPower Rear SideSystem GND Disconnect the power before proceeding Mounting the LensMounting the CS lens Mounting the C lensConnecting the Auto Iris Lens connector FocusingINSERTING/REMOVING AN SD Memory Card Inserting an SD Memory CardWhat is a memory card? Memory Card Information not IncludedRemoving an SD Memory Card Selecting a memory card that’s suitable for youContacts Lock Switch Memory Card UseMemory Card Components SdhcConnecting with Other Device Connecting to the monitorPower Supply Power NetworkConnecting to Audio Input/Output MicrophoneLINE-IN LINE-OUT Speaker Pre-AmpAudio I/O Block Diagram Microphone Speaker Pre-AmpConnecting to the I/O port box Alarm I/O Wiring DiagramHOW to USE the Menu KEY You can configure the camera settings using the Web ViewerFactory Defaults Main MenuProfile Camera Setup You can configure the general settings of the camera moduleCamera ID IrisMotion DNRShutter SENS-UPDAY/NIGHT White BALAny excessively bright area in a night scene will be masked Digital Zoom DetailAGC Color SUP ReverseZone Setup Privacy ZoneSelect the Pixel Level You will see dots on the screenFactory Default OthersOSD Color You can set the font color of the user interface The camera type may different, depend on the video signal System InfoLanguage You can check the system informationNetwork connection and setup Network connection and setup Select Status from the Settings menu of the IP RouterSetting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANIP Address Setup Buttons used in IP InstallerURL Static IP Setup Manual Network SetupAuto Set English Auto Network Setup Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingConnecting to the Camera from a Shared Local PC Connecting to the Camera from a Remote PC VIA the InternetEx http//mfffe42.websamsung.net Connecting to the Camera Using URLConnecting via URL If the Http port is other than Normally, you wouldLogin To check the Ddns addressInstalling Activex For Windows XP Service Pack 2 usersUsing the Live Screen Setup Move to the Setup screen AboutReset Alarm SD SearchBackup To capture the snapshotTo print out the screenshot To record a videoClick on the scene to record Recorded space, recording will be forcibly ended Click OKWeb viewer Using the SD Search Viewer Screen SD Search Viewer Screen layoutAccessing the Setup Screen Default SetupTo configure the video & audio settings Brightness from 1 to Contrast Adjust the contrast fromTo configure the IP settings Setup screen Click Basic User User setup window appears To set the user accountWhen done, click Apply Selected language will be applied To set the display languageClick Basic Language System Setup To set the date/timeTo update the software Alarm occurrence 1, 2 When an alarm is generatedTo check the log information Select System Log Log information list appearsTo reset the system All Restores all settings to the defaultTo set the Https Click OK to restart the systemOverlay Setup To Set IP FilteringTo set the text You can display text on the screenEvent Setup To set the event transfer functionTo test the FTP transfer Click Test Verified will be displayedSetup screen To setup the record To set an alarm imageTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer Network Setup To set the video transfer modeTo set the Ddns DAY Mode ITSGaming ALCTerminology CavlcBitrate Control CBRConstant Bitrate English Specifications CS/C RAMDSP 4CIFSetup HTTPS, SSL, DhcpARP, DNS, DDNS, Vsip DdnsNtsc Http APISDK Frame Rate Ntsc EstimationHPelGOP size15 MPEG4 4CIF 30 FPS 15 FPS FPSMPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL 25 FPS 13 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Troubleshooting Problem SolutionVerify the settings in the following sequence NTP must be properly configuredAlarm Video Transmission must be enabled Analysis settingGPL/LGPL Software License GNU General Public LicensePreamble We protect your rights with two stepsProgram, and can be reasonably Page Page No Warranty How to Apply These Terms to Your New ProgramsEND of Terms and Conditions Preamble Terms and Conditions Source Code Basic PermissionsProtecting Users Legal Rights From Anti-Circumvention Law Conveying Verbatim Copies Conveying Modiﬁed Source VersionsConveying Non-Source Forms Installed in ROM Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsPatents Valid No Surrender of Others FreedomUse with the GNU Affero General Public License GNU Lesser General Public License END of Terms and ConditionsPreamble Page Page Page Page Page How to Apply These Terms to Your New Libraries OpenSSL License No Event Shall the OpenSSLOriginal SSLeay License Copyright C1995-1998 Eric Young

Related manuals

Manual 111 pages 21.4 Kb

Manual 109 pages 60.28 Kb

Manual 109 pages 16.11 Kb