Canon VC-C50i instruction manual English

Page 9

20.Safety Check - Upon completion of any service or repairs to this equipment, ask the service technician to perform safety checks to determine that the equipment is in safe operating order.

21.Do not install the equipment in the following locations as this can cause a fire or electric shock:

-Hot locations

-Close to a fire

-Very humid or dusty locations

-Locations exposed to direct sunlight

-Locations exposed to salt spray

-Close to flammable solvents (alcohol, thinners, etc.)

22.When any of the following occurs, immediately switch OFF the equipment, unplug it from the main power supply and contact your nearest Canon supplier. Do not continue to use the equipment as this can cause a fire or electric shock.

-The equipment emits any smoke, heat, abnormal noise, or unusual odor.

-A metal object falls into the equipment.

-The equipment is damaged in some way.

23.Please observe the following when using the equipment. Failure to do so can result in a fire or electric shock.

-Do not use flammable sprays near the equipment.

-Do not subject the equipment to strong impacts.

24.Please observe the following when handling the batteries. Failure to do so can result in the batteries bursting or emitting heat, sparks or corrosive fluid.

-Do not throw the batteries into a fire, and do not heat, short-circuit or attempt to disassemble the batteries.

a Safe Use of Equipment

 

- Do not attempt to recharge the

 

batteries.

 

- Do not use batteries other than those

 

specified for use with the equipment.

 

25. Please observe the following when

 

handling the batteries. Failure to do so

 

may result in the batteries bursting or

 

emitting heat, sparks or corrosive fluid.

 

- When the batteries are used up, or

 

when the equipment will not be used

 

for an extended period, remove the

 

batteries.

 

- When replacing the batteries, always

 

replace both batteries, and do not

ENGLISH

use different types of batteries

together.

- Ensure that the + and – terminals are

correctly positioned when you load

the batteries.

 

- If any soiling or leakage of the

 

internal battery fluid occurs,

 

thoroughly clean the soiling or leaked

 

fluid with water.

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents English Introduction Features of the VC-C50i/VC-C50iR Communication CameraExclusion of Liability Safe Use of Equipment Important WarningsSerial No For Users in the UK PA-V16 FDA regulation Important Operational InstructionsFCC Notice Important Safety Instructions Example of Antenna Grounding AS PER National Electrical Code English Maintenance Cleaning the EquipmentCleaning the Lens Contents Checking the Camera and Its Accessories Before You Use the ProductNomenclature Installing the Product Using a TripodDo not overtighten the mounting screw Using the Wide-angle Converter Connecting the ComponentsAttaching the Multiconnector to the Camera Connecting to the MulticonnectorRaise the levers on each side of the multiconnector plug Push the multiconnector plug into the multiconnector socketA10 Multiconnector Pin LayoutExternal Device I/O Terminals External device input terminalsExternal device output terminals LED Display Camera Status Turning the Power on and OFFControlling the Camera from the Wireless Controller Remove the battery cover Insert the batteries Loading the Batteries into the Wireless ControllerReplace the battery cover Observe the following precautions when handling batteriesTo move the camera head left and right pan Changing the Camera Head Angle pan/tilt/home positionTo move the camera head up and down tilt To move the camera head to the Home positionTo zoom in Tele Zooming In/Out TELE/WIDETo zoom out Wide Press the t side of the buttonTo use autofocus mode Focusing FocusPress the a button Camera focuses automaticallyTo fix the focus Adjusting the Brightness BrightTo focus on nearby subjects To focus on distant subjectsStoring a Preset Camera Position Preset To restore a preset positionTo store a position To switch the camera off Switching the Camera on and OFFTo switch the camera on Status of camera ON, press the p buttonButtons Used to Specify the Settings Camera SettingsSplay Menu Setting the ClockColumns Selected position Character area Entering CharactersSpeed Setting the Camera Head Movement Speed and Pan OperationYES no Setting the Range of Camera Head MovementSetting the AE VC-C4 Mode Setting Menu Night Mode SettingsRS-232C Settings Setting the ID Number ID ModeSelecting the Camera to be Controlled Press the i buttonPress a number button in this case Press the 0 button Cancelling ID ModeWireless controller does not work TroubleshootingCannot adjust the camera head angle properly There is no picture on the monitorCheck 1 The camera is set to manual focus mode Camera will not move to a preset positionCheck 3 You restored a preset position Camera will not focusDefault Factory Default SettingsDetails SpecificationsSpecifications
Related manuals
Manual 243 pages 56.63 Kb

VC-C50i specifications

The Canon VC-C50i is a versatile and powerful camera designed primarily for video conferencing, remote monitoring, and live streaming applications. This camera boasts a range of features and technologies aimed at delivering high-quality visuals and ease of use for professionals and organizations alike.

One of the standout characteristics of the VC-C50i is its capability to capture detailed and vibrant images, thanks to its 1/3-inch CCD image sensor. This sensor allows the camera to perform well in various lighting conditions, ensuring that footage remains clear and sharp, even in lower light environments. The camera supports a maximum resolution of 1280x720, producing high definition video that meets the demands of modern broadcasting and video conferencing.

A notable feature of the VC-C50i is its powerful 20x optical zoom lens. This affords users the flexibility to focus on subjects from a distance without sacrificing image quality. The camera's pan, tilt, and zoom (PTZ) capabilities allow for precise and smooth movements, making it easier to capture dynamic scenes or highlight specific areas of interest within a live setting. This functionality is essential in professional environments, such as lecture halls, conference rooms, and houses of worship.

Moreover, the VC-C50i incorporates advanced digital signal processing technology to enhance image quality further. It features automatic white balance, backlight compensation, and a wide dynamic range, contributing to optimal performance across varying conditions. These technologies ensure that the camera adapts intelligently to changes in the environment, delivering consistent video output.

The camera is equipped with comprehensive connectivity options, including both analog and digital interfaces. This makes it compatible with a variety of systems, allowing seamless integration with existing setups. Users can control the VC-C50i remotely via RS-232 or Ethernet connections, providing flexibility in operation and setup. Additionally, the network transmission capability supports streaming over IP, making it suitable for online broadcasting.

Built with durability in mind, the VC-C50i features a compact and robust design ideal for installations in various settings. Its straightforward configuration process ensures that users, regardless of technical expertise, can get the camera up and running quickly. Overall, the Canon VC-C50i stands out as a reliable and efficient choice for anyone seeking professional-grade video performance.
Top Page Image Contents