D-Link DCS-5010L user manual Camera Control

Section 3 - Configuration

Camera Control

This section allows you to configure the pan and tilt operations of your camera. You can specify the lens location for the Home button, and specify up to 24 pre-set lens locations, allowing you to quickly view these pre-determined areas of the camera’s range from the Live Video screen.

Pan/Tilt Wheel: Use the directional arrows on the wheel to move the camera lens through its pan and tilt ranges.

Set as Home: Click this button to set the current lens location as the Home location. Once set, the camera will return to this location whenever the Home button in the center of the pan/tilt wheel is clicked.

Default Home: Clicking on this button returns the Home location to the factory default setting.

Pan Step: Select the increment of movement for each press of a pan (up/down) arrow on the pan/tilt wheel.

Tilt Step: Select the increment of movement for each press of a tilt (left/right) arrow on the pan/tilt wheel.

Preset Position: The camera allows you to specify up to 24 pre-determined lens positions, which can be used to quickly move the camera’s view to areas of interest.

•Select the number of the position that you would like to specify.

•Use the pan/tilt wheel to move the camera’s lens to the desired preset position.

•Enter a name to help you easily identify the preset.

•Click on the Set button to save the preset.

•Any pre-saved positions can be cleared by selecting the desired preset and clicking on the Clear button.

D-Link DCS-5010L User Manual 37