D-Link DCS-5010L user manual Firmware Upgrade

Page 40

Section 3 - Configuration

Firmware Upgrade

Your current firmware version and date will be displayed on your screen. You may go to the D-Link Support Page to check for the latest firmware versions available.

To upgrade the firmware on your DCS-5010L, download the latest firmware from the D-Link Support Page to your local hard drive. Click the Browse... button and select the firmware file, then click theUpload button to start the firmware upgrade.

Warning: The firmware upgrade process must not be interrupted or the camera may be damaged. When upgrading firmware, do not unplug the camera or your PC, or close your web browser until the process is complete. It is also highly recommended that you use a wired connection for your camera and PC when upgrading firmware.

D-Link DCS-5010L User Manual

40

Image 40
Contents Pan & Tilt Day/Night Network Camera Manual Overview Manual RevisionTrademarks DescriptionTable of Contents Product Overview Package ContentsSystem Requirements Introduction Features Hardware Overview Front ViewRear View Installation Connect the Ethernet Cable and Power Cable Zero Configuration SetupAttach the External Power Adapter Check Your mydlink Account Register Device to mydlinkInstallation Camera Setup Wizard Manual Hardware Installation Connect the Ethernet Cable and Power CableWireless Installation Considerations WPS Push Button Setup To create a WPS connection StepMounting Instructions Mydlink Configuration Using the Web Configuration InterfaceLive Video FormatSetup WizardInternet Connection Setup Wizard Configuration Network Setup Wireless Setup Dynamic DNS Ddns Image Setup Video Settings AudioMotion Detection Address MailAddress e-mails Images to an AccountFTP FTP server on the Image Frequency specifiedTest FTP Server Time and Date Day/Night Mode ModeCamera Control Maintenance AdminSystem Drive Configuration From File buttonDevice Firmware Upgrade Status Device InfoActive User Troubleshooting What is Remote Access? How do I enable it?Troubleshooting Why don’t the LEDs light up? Why is the camera’s network connection unreliable?Why are no images available through the Web browser? Technical Specifications Appendix a Technical SpecificationsOutput 12 V DC, 1 a Focal length 2.2 mm, F2.0VGA 1/5 inch Cmos sensor Phone Support Contacting Technical SupportAppendix B Contacting Technical Support Limited Warranty WarrantyAppendix C Warranty Non-Applicability of Warranty Limited Software WarrantySubmitting a Claim USA Submitting a Claim Canada What Is Not Covered Disclaimer of Other WarrantiesLimitation of Liability Governing LawTrademarks Copyright StatementCE Mark Warning FCC StatementFCC Caution FCC Radiation Exposure StatementIndustry Canada Statement Important NoteRegistration Appendix D Registration