Cisco Systems manual Initializing Cisco MGX 8260 Media Gateway Nodes

Chapter 2 Cisco MGM Installation

Initializing Cisco MGX 8260 Media Gateway Nodes

Initializing Cisco MGX 8260 Media Gateway Nodes

For the Cisco MGM to communicate with Cisco MGX 8260 Media Gateways, initialize the following parameters for each MGX 8260 chassis.

•Management IP address

•Site name (sysLocation parameter)

•Community strings

•Trap registrations

You can configure these settings using the CLI or Cisco WebViewer. Nodes usually have an IP address and site name (sysLocation parameter) configured, but you may need to initialize SNMP communities and register traps. Check with your system administrator before assigning or changing IP addresses.

	Cisco Media Gateway Manager for the Cisco MGX 8260 Media Gateway User Guide
2-10	Release 1.0, Part Number 78-11705-01, December 2000