Chapter 2 Cisco MGM Installation
Installing the Cisco MGM Server
Installing the Cisco MGM Server
To install the server, perform these major steps:
Step 1 Install the Netscape browser.
Step 2 Install Cisco EMF server.
Step 3 Configure RAW partitions.
Step 4 Install Cisco MGM server.
Installing a Netscape Browser
Cisco WebViewer requires a full installation of the Netscape browser to operate correctly. Refer to the Netscape documentation for installation procedures.
Record the path to the Netscape executable; you use this information when installing Cisco MGM.
Installing Cisco EMF Server Software
Install and start Cisco EMF according to the procedures in the Cisco Element Management Framework Installation and Administration Guide.
Note Answer No when the installation scripts asks if you want to use a RAW partition.
Configuring Raw Partitions
Perform this procedure after installing Cisco EMF if you want to use a raw file partition for the database and database transaction log.
To configure a raw partition, follow these steps:
Step 1 Log in as the root user.
Step 2 Configure one or more disk drive for raw partitioning using the UNIX format command. Consult with your system administrator if you are not familiar with this command.
Step 3 Stop the Cisco EMF server:
<CEMF_ROOT>/bin/cemf stop
where CEMF_ROOT is the CEMF installation directory
Step 4 Stop ObjectStore:
/etc/rc2.d/S80ostore4 stop
Step 5 Stop the AV License Manager:
/etc/rc2.d/S98avlm stop
|
| Cisco Media Gateway Manager for the Cisco MGX 8260 Media Gateway User Guide |
|
|
|
|
|
| |||
| Release 1.0, Part Number |
|
|
| |
|
|
|
|