![](/images/new-backgrounds/1179472/1794729x1.webp)
Chapter 7 PIX 535
Installing the PIX 535
Table
Table
|
| Shared with |
|
Gigabit Ethernet Card | Bus Type | 33 MHz Device | Speed |
|
|
|
|
64/66 | No | 100% | |
|
|
|
|
64/66 | Yes | 50% | |
|
|
|
|
32/33 | No | 25% | |
|
|
|
|
64/66 | No | 50% | |
|
|
|
|
32/33 | No | 25% | |
|
|
|
|
Installing the PIX 535
This section includes the following topics:
•Before Installing the PIX 535, page
•Mounting the PIX 535, page
•PIX 535 Network Interface Installation, page
Before Installing the PIX 535
Observe the following before installing the PIX security appliance:
•Review the safety precautions outlined in the Regulatory Compliance and Safety Information document.
•Place the PIX security appliance on a stable work surface.
Mounting the PIX 535
To mount the PIX 535 on a rack, perform the following steps:
Step 1 Attach the mounting brackets to the unit using the supplied screws.
Step 2 Attach the brackets to the holes near the front on both sides of the unit.
Step 3 Attach the unit to the equipment rack.
Cisco PIX Security Appliance Hardware Installation Guide
|
| ||
|
|