Cisco Systems 535 user service Inserting a Dimm Memory Strip in the PIX

Chapter 7 PIX 535

Installing a Memory Upgrade

Step 8 Install the first DIMM strip in socket J41 and the second DIMM strip in socket J44, as shown in Figure 7-8and Figure 7-9.

a.Carefully grasp the DIMM strip from either end, being careful not to touch the components on the strip. Note that the DIMM strip is notched, which prevents it from being installed incorrectly. So, do not force installation.

b.Open the two plastic wing connectors at the sides of the memory socket, insert the DIMM strip, and close the wing connectors to secure it in place.

Figure 7-8 Inserting a DIMM Memory Strip in the PIX 535

DIMM

89067

J45
J44
J43
Wing	J42
	J41
connector
	J40

Figure 7-9 Securing a DIMM Memory Strip in the PIX 535

Step 9 Reinstall the component tray and the screws that hold the assembly in place.

Step 10 Remove the grounding wrist-strap.

Step 11 Rack-mount the chassis or place it on a flat, stable surface.

Cisco PIX Security Appliance Hardware Installation Guide

78-15170-03 7-13