Cisco Systems 7030 manual Restore button, Image tools Hotspot Zoom button, Hotspot Pan/Tilt

Chapter 4 Camera Management

Viewing Live Video

Table 4-4	Camera Video & Control Window Controls (continued)
Control		Description
Contrast slider		To control contrast of the video image, drag the slider, or enter a value from 1
		through 10 and press the Enter key. A higher value increases the contrast and
		a lower value decreases the contrast.
		The default value is 5.
Sharpness slider		To control the sharpness of the video from the IP camera, drag the slider, or
		enter a value from 1 through 100 and press the Enter key. A higher value
		increases the sharpness and a lower value decreases the sharpness.
		The default value is 50.
Saturation slider		To control the saturation of the video from the IP camera, drag the slider, or
		enter a value from 1 through 100 and press the Enter key. A higher value
		increases the saturation and a lower value decreases the saturation.
		High saturation provides a vivid, intense color for a video image. With less
		saturation, the video image appears more muted and gray.
		The default value is 50.
Restore button		Resets white balance, brightness, contrast, sharpness, saturation, and hue to
		their default values.
Image tools
Hotspot Zoom button		Click this latch button to enables the digital zoom feature, which provides
		five-step digital zooming in for the normal (not full screen) video display.
		Click this button again to disable the digital zoom feature.
		To perform a digital zoom, engage the Hotspot Zoom button and click the
		video display. The first five clicks zoom the display. The sixth click returns to
		unzoomed display.
Hotspot Pan/Tilt		Click this latch button to enable the hotspot pan/tilt feature, which lets you pan
button		and tilt the IP camera toward a point that you click in the video display.
		To perform a hotspot pan/tilt action, engage the Hotspot Pan/Tilt button, then
		click the video image at the location toward which you want the IP camera to
		pan and tilt.
		This feature require that the IP camera be installed with a pan/tilt mount that
		supports the Pelco D protocol and that pan and tilt functions are enabled.
Save Snapshot button		Captures and saves a the current video image as a .gif file or a .jpg file in the
		location of your choice and with the file name of your choice.
		When you click this button, the Snapshot window appears. Click Save and
		follow the on-screen prompts to save the image with the name and in the
		location that you want.
Flip button		Rotates the video image by 180 degrees.

Mirror button

Reverses the video image.

Cisco Video Surveillance 7030 IP Camera Installation Guide

4-6 OL-28692-01