Cisco Systems 7030 Full Screen check, Save Settings button, Focus/Zoom controls, Focus slider

Chapter 4 Camera Management

Viewing Live Video

Table 4-4	Camera Video & Control Window Controls (continued)
Control		Description
Full Screen check		Becomes available when you click check Enable Motion Detection check box.
box		Check the Full Screen check box to cause the IP camera to examine the entire
		video field for activity.
		You can configure the following items for this video field:
		• Sensitivity—Designates the relative amount of activity that the IP camera
		must detect in the area before it generates an alert. A lower value means
		that more, or faster, activity is required to trigger an alert. A higher value
		means that less, or slower, activity is required. The default value is 80.
		• Threshold—Designates the percentage of pixels that the IP camera must
		identify as changed in the area before it generates an alert. The camera
		monitors for pixel changes at the defined sensitivity level. The default
		threshold value is 10.
		To configure sensitivity or threshold, right-click anywhere in the video field
		border and then drag the Sensitivity and Threshold sliders to the desired
		values. Alternatively, enter a value from 1 through 100 for an option and press
		the Enter key. To reset the sensitivity and threshold to their default values of
		50, click Restore.
Restore button		Deselects all areas in the video field that you have selected for motion
		detection monitoring.
Save Settings button		Save the current motion detection configuration.

Focus/Zoom

Note The Focus/Zoom feature is available only on the Cisco Video Surveillance 6020, 6030, and 6400 IP cameras.

Up Arrow toggle button

Down Arrow toggle button

Click the Up Arrow to display the focus/zoom controls. The button changes to the Down Arrow button.

Click the Down Arrow button to hide the focus/zoom controls. The button changes to the Up Arrow button.

Focus/Zoom controls

Note These controls appear when you click the Up Arrow in the Focus/Zoom area.

		Zoom slider	To control the field of view zoom factor, drag the slider left to zoom out (wide),
			or drag the slider to the right to zoom in (telephoto).
		Focus slider	To control the field of view focus, drag the slider left to focus on near objects,
			or drag the slider to the right to focus on far objects.
		Auto Focus button	Click to automatically focus the IP camera for the selected zoom.
		Specify Region check	Used in conjunction with the Auto Focus option. Check Specify Region check
		box	box and click Auto Focus to focus the IP camera with priority to a selected
			region in the field of view. The region is user configurable and can be moved
			around the screen.
		Reset button	Resets the lens position and slider control positions to their default values (full
			wide and near).
	Cisco Video Surveillance 7030 IP Camera Installation Guide
4-8			OL-28692-01