How to use OSD Menu
Back Space Char.
Space Char.
If you want to use blank, choose Space character (“ ”). If you want to delete a character before, use back space character (“ ”).
③If you complete the Label editing, move cursor to “OK” and press NEAR or ENTER key to save completed label. To abort current change, move cursor to “Cancel” and press NEAR or ENTER key.
AUTO PAN SETUP
AUTO PAN SETUP |
|
APAN NO. | 1 |
1ST POS. | NOT USED |
2ND POS. | NOT USED |
APAN SPEED | 30/SEC |
CLEAR APAN | CANCEL |
BACK
EXIT
• Auto Pan Number | [1~8] |
Selects Auto Pan number to edit. If a selected Auto Pan has not defi ned, “NOT USED” is displayed in 1st Position and 2nd Position
• 1st Position / 2nd Position [PRESET 1~128]
Set up the 2 position for Auto Pan function. If a selected preset is not defi ned, “UNDEFINED” will be displayed as shown below.
AUTO PAN SETUP |
| ||
APAN NO. | 1 | ||
1ST POS. | PRESET5 | ||
2ND POS. | PRESET8 | ||
|
|
| UNDEFINED |
|
|
| |
When Auto Pan function runs, camera moves from the preset assigned as the 1st point to the preset assigned as the 2nd point in CW(Clockwise) direction. Then camera moves from the preset assigned as the 2nd point to the preset assigned as the 1st point in CCW(Counterclockwise) direction. In case that the preset assigned as the 1st point
is same as the preset assigned as the 2nd point, camera turns on its axis by 360° in CW direction and then it turns on its axis by 360° in CCW direction.
•APAN(AUTO PAN) Speed [1°/sec ~180°/sec] Sets Auto Pan speed from 1°/sec to 180°/sec.
• Clear APAN(AUTO PAN) [CANCEL/OK]
Deletes current Auto Pan data.
PATTERN SETUP |
|
|
PATTERN SETUP |
|
|
PATTERN NO. | 1 | ENG |
| UNDEFINED | |
CLEAR PATTERN | CANCEL | |
<EDIT PATTERN> |
|
|
BACK
EXIT
• Pattern Number | [1~4 ] |
Selects Pattern number to edit.
If a selected pattern number is not defi ned, “UNDEFINED” will be displayed under selected pattern number.
• Clear Pattern | [CANCEL/OK] |
Deletes data in current pattern
•Edit Pattern
Starts editing pattern.