How to use OSD Menu
CAMERA SETUP
Setup the general functions of zoom camera module
ZOOM CAMERA SETUP
FOCUS MODE | SEMIAUTO | |
DIGITAL ZOOM | ON | |
IMAGE FLIP | OFF | |
FLICKERLESS | OFF | |
<WHITE BALANCE SETUP> | ||
<AUTO EXPOSURE SETUP> | ||
BACK |
|
|
EXIT |
|
|
• Focus Mode | [AUTO/MANUAL/SEMIAUTO] | |
Sets camera focus mode.
SEMIAUTO Mode
This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode. Manual Focus mode activates in preset operation and Auto Focus mode activates when jog operation starts.
With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset.
• Digital Zoom | [ON/OFF] |
Sets digital zoom function to ON/OFF. If this is set to OFF, optical zoom function runs but zoom function stops at the end of optical zoom magnifi cation.
• Image Flip | [ON/OFF] |
To display Upside down image.
• Flickerless | [ON/OFF] |
Turn on or off the Flickerless function. In this function, AE mode becomes Shutter Priority mode and shutter speed value will be fi xed to 1/100 sec.
❖White Balance Setup
WB SETUP - GLOBAL
WB MODE | AUTO |
zRED ADJUST | |
zBLUE ADJUST |
BACK
EXIT
• WB Mode | [AUTO/MANUAL] |
In Manual mode, Red and Blue level can be set up manually
• | Red Adjust | [0~255] |
• | Blue Adjust | [0~255] |
❖ Auto Exposure Setup | ENG |
AE SETUP | |
WDR/BLC | ALL OFF |
DAY/NIGHT | AUTO |
AE MODE | AUTO |
IRIS LEVEL
GAIN LEVEL
SHUTTER SPD
BRIGHTNESS
BACK
EXIT
• WDR/BLC | [ ALL OFF / WDR ON / BLC ON ] |
Select WDR(Wide Dynamic Range) or BLC(Backlight Compensation) function. All OFF means turning off both functions.
• Day/Night | [AUTO/DAY/NIGHT] |
AUTO exchanges Day / Night | |
• AE MODE | AUTO / MANUAL / IRIS / SHUTTER |
| / BRIGHT |
AUTO: Full Auto mode for AE function
MANUAL: In manual mode. IRIS, GAIN, SHUTTER
SPEED can be changed in this mode.
IRIS: Iris priority mode. You can change IRIS while others are adjusted automatically.
SHUTTER: Shutter priority mode. Shutter speed can be changed while others are adjusted automatically.
BRIGHT: In this mode, you can assign AE value in terms of Brightness.