4XEM IPCAMWL40 manual Application settings, Weekly schedule, Event operation

Page 47

Application settings

Weekly schedule

“Sun” ~ “Sat” Select the days of the week to perform the following operations. “Snapshots begin at” Set the time to start operations.

“Snapshots stop at” Set the time to stop operations.

Setting identical begin time and stop time means 24-hour operation.

“All the time except for the above schedule” Set the schedule all the time except

for the above in a week.

Event operation

“Delay second(s) before detecting next event” Set the time delay before restarting to check on the triggering condition when the current condition is triggered. “Take snapshots at second(s) after event” After the camera has taken a snapshot when a condition is triggered, another snapshot will be taken after this configured interval, in seconds.

“Trigger condition” There are four conditions relative to the digital input and the three windows for motion detection. More than one condition can be selected at once. Select the appropriate digital input condition that suits the characteristics of the external device. “high”, “low” selects level-triggering via external voltage input. “rising”, “falling” is for edge-triggering. There are three windows for motion detection each can be assigned a name. If motion detection has not been set up, “undefined” will be shown instead of the window title. If this happens, clicking on “Motion detection” and a note will show to direct the User to the configuration page for motion detection. “Trigger action” There are four options for two types of action. More than one condition can be selected at once. While choosing to trigger an output alarm, the digital output will short both pins and complete the external device’s circuit. The normal state is open. Either email or FTP can be used to command uploading snapshots. The snapshot names will be “vpre.jpg”, “vtrg.jpg”, and “vpos.jpg”, respectively. They stand

- 46 -

Image 47
Contents Page Before You Use This Product Table of Contents Smtp FTP Page Package Contents To install in Ethernet Hardware installationTo install in wireless LAN Software installation Page Add Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in Main screen with camera view Primary user’s capabilitySnapshot Digital ZoomDigital Output Client settings Url http//Network Camera/protocol.html For Best Real-time Video Images Administrator’s capabilityFine-tuning for Best Performance Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesOpening accounts for new users Protect Network Camera by passwordsMore flexible options for viewers How to change the subject text of homepageChange homepage layout How to change the background How to change the font colorPage Page How to design my own homepage to replace the current one Page Build a multimedia web attraction site Demo on multiple sites mid-scale serviceProduct demo for e-business large-scale service Page Page Image URL Build a security application Send snapshots when motion is detected Page Software revision upgrade Definition in Configuration System parameters Security settings Streaming Network settingsGeneral Wlan Configuration Page Smtp Mail & FTPPage Ddns and UPnP settings Video codec parameters Page Motion detection Event operation Application settingsWeekly schedule Sequential operation Homepage layout settings Viewing system parameters Restore factory default settingsViewing system log Status LED TroubleshootingReset and restore Frequently asked questions Page Page Query status of the digital input URL commands of the Network CameraCapture update Snapshot of Jpeg image Restore factory default settingsRestart system System resource URL URLSystem configuration URL General format of command URLNetwork configuration URL Security configuration URLWlan Ssid Mail & FTP configuration URL Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URL Networking Technical specifications