4XEM IPCAMWL40 manual To install in wireless LAN

Page 8

self-test, go to next paragraph “Software installation”. If the Ethernet is not available, Network Camera will switch to wireless LAN mode.

To install in wireless LAN

If the Ethernet is not available while power on, the Network Camera will search for any access point with the SSID “default”. Once any access point is found, the LED will turn green to wait for installation. If the network environment cannot meet the default settings, install Network Camera in Ethernet to proceed with wireless LAN configuration.

The Network Camera provides a general I/O terminal block with one digital input and one relay switch for device control. Pin 1 and pin 2 can be connected to an external sensor device and the state of voltage will be monitored from the initial state 'LOW'. The relay switch of pin 3 and pin 4 can be used to turn on or off the external device.

Consult with the dealer of the peripherals for correct installation.

1	DI-	INPUT (Initial state of DI is low)
2	DI+	INPUT (Max. 50mA, 12VDC)
3	SW_COMMON	OUTPUT (open from SW_OPEN at initial state)
		(close with SW_OPEN when set DO to ON)
4	SW_NOPEN	OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC

- 7 -

Image 8

Contents Page Before You Use This Product Table of Contents Smtp FTP Page Package Contents Hardware installation To install in EthernetTo install in wireless LAN Software installation Page Add Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use AuthenticationInstalling plug-in Primary user’s capability Main screen with camera viewSnapshot Digital ZoomDigital Output Client settings Url http//Network Camera/protocol.html For Best Real-time Video Images Administrator’s capabilityFine-tuning for Best Performance Somewhere Between Real-time and Clear Images Only Quality Images Will DoProtect Network Camera by passwords Opening accounts for new usersMore flexible options for viewers How to change the subject text of homepageChange homepage layout How to change the font color How to change the backgroundPage Page How to design my own homepage to replace the current one Page Build a multimedia web attraction site Demo on multiple sites mid-scale serviceProduct demo for e-business large-scale service Page Page Image URL Build a security application Send snapshots when motion is detected Page Software revision upgrade Definition in Configuration System parameters Security settings Streaming Network settingsGeneral Wlan Configuration Page Mail & FTP SmtpPage Ddns and UPnP settings Video codec parameters Page Motion detection Event operation Application settingsWeekly schedule Sequential operation Homepage layout settings Viewing system parameters Restore factory default settingsViewing system log Status LED TroubleshootingReset and restore Frequently asked questions Page Page URL commands of the Network Camera Capture update Snapshot of Jpeg imageRestore factory default settings Query status of the digital inputRestart system URL System resource URLGeneral format of command URL System configuration URLSecurity configuration URL Network configuration URLWlan Ssid Mail & FTP configuration URL Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URL Technical specifications Networking