4XEM IPCAMWL40 manual Troubleshooting, Status LED, Reset and restore

Page 51

Appendix

A. Troubleshooting

Status LED

After powering up, the Network Camera performs a self-diagnostic to detect any hardware defects. The following table lists the LED patterns in general . In case of any fatal error, the LED will blink in a pattern other than those below.

Condition	LED color

During self-diagnostic after power on	Blink in interchanged green and red

Ethernet signal is lost	Steady red till Ethernet is detected

Before network is setup	Steady green till IP address is confirmed

After network is setup	Blink green every second

Any hardware failure	Other patterns

Reset and restore

Restore the factory defaults

will erase any previous settings. Reset or restore the system after power on.

There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset the system or restore the factory default settings. Sometimes resetting the system can make the system back to normal state. If the system still has problems after reset, restore the factory settings and install again.

RESET: Poke the wrench to click on the button.

RESTORE: 1. Poke the wrench to press on the button continuously.

2.Wait for self-diagnostic to run twice.

3.Withdraw the wrench as soon as the second self-diagnostic starts.

- 50 -

Image 51

Contents Page Before You Use This Product Table of Contents Smtp FTP Page Package Contents To install in Ethernet Hardware installationTo install in wireless LAN Software installation Page Initial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main screen with camera view Primary user’s capabilityDigital Zoom Digital OutputSnapshot Client settings Url http//Network Camera/protocol.html Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesOpening accounts for new users Protect Network Camera by passwordsHow to change the subject text of homepage Change homepage layoutMore flexible options for viewers How to change the background How to change the font colorPage Page How to design my own homepage to replace the current one Page Demo on multiple sites mid-scale service Product demo for e-business large-scale serviceBuild a multimedia web attraction site Page Page Image URL Build a security application Send snapshots when motion is detected Page Software revision upgrade Definition in Configuration System parameters Security settings Network settings GeneralStreaming Wlan Configuration Page Smtp Mail & FTPPage Ddns and UPnP settings Video codec parameters Page Motion detection Application settings Weekly scheduleEvent operation Sequential operation Homepage layout settings Restore factory default settings Viewing system logViewing system parameters Troubleshooting Reset and restoreStatus LED Frequently asked questions Page Page Query status of the digital input URL commands of the Network CameraCapture update Snapshot of Jpeg image Restore factory default settingsRestart system System resource URL URLSystem configuration URL General format of command URLNetwork configuration URL Security configuration URLWlan Ssid Mail & FTP configuration URL Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URL Networking Technical specifications