4XEM IPCAMWL40 manual Hardware installation, To install in Ethernet

Page 7

Installation

Hardware installation

Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length.

Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock.

Upon powering up, the device runs through a self-test procedure and the front LEDs will blink between green and red a few times. If self-test passes, the LED will be green and the Network Camera will standby for getting IP address. If self-test fails the red LED will blink several times. Refer to Appendix A for troubleshooting.

The Network Camera will first detect Ethernet. If it does not connect to Ethernet, the Network Camera will try WLAN. During the searching and connecting process to the wireless access point or station, the red LED of the Network Camera will flash every second. Until the Network Camera connects to the other wireless device, the red LED will become lighted. Operating in either network mode, the green LED will flash every second as heartbeat to indicate alive.

To install in Ethernet

Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the power adapter. If the LED turns out to be steady green after

- 6 -

Image 7

Contents Page Before You Use This Product Table of Contents Smtp FTP Page Package Contents To install in Ethernet Hardware installationTo install in wireless LAN Software installation Page Check Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main screen with camera view Primary user’s capabilityDigital Output Digital ZoomSnapshot Client settings Url http//Network Camera/protocol.html Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesOpening accounts for new users Protect Network Camera by passwordsChange homepage layout How to change the subject text of homepageMore flexible options for viewers How to change the background How to change the font colorPage Page How to design my own homepage to replace the current one Page Product demo for e-business large-scale service Demo on multiple sites mid-scale serviceBuild a multimedia web attraction site Page Page Image URL Build a security application Send snapshots when motion is detected Page Software revision upgrade Definition in Configuration System parameters Security settings General Network settingsStreaming Wlan Configuration Page Smtp Mail & FTPPage Ddns and UPnP settings Video codec parameters Page Motion detection Weekly schedule Application settingsEvent operation Sequential operation Homepage layout settings Viewing system log Restore factory default settingsViewing system parameters Reset and restore TroubleshootingStatus LED Frequently asked questions Page Page Query status of the digital input URL commands of the Network CameraCapture update Snapshot of Jpeg image Restore factory default settingsRestart system System resource URL URLSystem configuration URL General format of command URLNetwork configuration URL Security configuration URLWlan Ssid Mail & FTP configuration URL Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URL Networking Technical specifications