Grandstream Networks HT503 manual Configuration, Application Network Schema

Page 2

Configuration

The solution is based on IP or computer network, therefore static IP is suggested. If the router used support static DHCP, then DHCP can also be used as long as the IP will NOT change after the router and device reboot.

Assume the user already has a home computer network or LAN in the office and no SIP server or proxy involved in such solution. If any SIP server or Proxy involved, the setting will be different although the principle is similar.

Following is the configuration for the equipment involved. We recommend user to use the default setting and ONLY change the parameters mentioned before. For used device, a factory reset is required to make the application running smoothly.

Analog Phone

HT503

Router

LAN

3G/4G BS

or

Wi-Fi AP

LaptopGXV3XXX

Surveillance Device

Smartphone

Figure 0: Application Network Schema

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Surveillance Solution How To Do It? Pre-RequestConfiguration Application Network SchemaHT-503 Scenario HT503 StatusHT503 IP Configuration HT503 FXO Port Configuration HT503 FXO Port Configuration HT503 FXS Port Configuration Optional IP Address Setting of Surveillance Products Surveillance Device Scenario GXV3XXX IPC or DVSSIP Configuration of Surveillance Products Motion Detection Configuration Motion Detection Configuration Smtp Setting Verification Check back the Surveillance DeviceCheck Snapshot of the Surveillance Device
Related manuals
Manual 38 pages 38.84 Kb
Top Page Image Contents