Grandstream Networks manual HT503 FXO Port Configuration

Page 6

Figure 1-5: HT503 FXO Port Configuration (Continued)

Below (Figure 1-5) is the FXO Port related configuration continued. The example below is using United States Bell Standard. If the HT503 is applied to other region, user is required to check with local carrier to search for the correct setting to make sure the HT503 function correctly.

∙Number of Rings: This is for inbound calls (e.g.: from cell phone) to the PSTN connected to the HT503 be forwarded to the surveillance device where a speaker system is connected. User can determine how many rings the speaker system will pick up (be aware the likely conflict with voicemail if the VM is enabled in that line). PIN is suggested for such inbound call for security reason to avoid any calls hit the speaker.

∙Wait for Dial Tone, 2 Stage Dialing suggested.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Surveillance Solution How To Do It? Pre-RequestConfiguration Application Network Schema HT-503 Scenario HT503 StatusHT503 IP Configuration HT503 FXO Port Configuration HT503 FXO Port Configuration HT503 FXS Port Configuration Optional IP Address Setting of Surveillance Products Surveillance Device Scenario GXV3XXX IPC or DVSSIP Configuration of Surveillance Products Motion Detection Configuration Motion Detection Configuration Smtp Setting Verification Check back the Surveillance DeviceCheck Snapshot of the Surveillance Device
Related manuals
Manual 38 pages 38.84 Kb
Top Page Image Contents